Tip
Using the Easy Configuration wizard to configure the SBC Edge Portfolio (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.
The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard to enable quick and easy deployment of an SBC in a Microsoft Teams environment.
For SBC 1000/2000 and SBC SWe Edge, the following SIP Trunks are supported:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- SoftBank ConnecTalk
- Softbank White Office
- Telstra Enterprise SIP Connect
- Twilio SIP Trunk
- Verizon SIP Trunk
Note
The following SIP Trunks are supported in the SBC 1000-2000 only:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- SoftBank ConnecTalk
- Softbank White Office
- Telstra Enterprise SIP Connect
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
Note
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.
Start
- In the WebUI, click the Tasks tab.
- In the left navigation pane, go to SBC Easy Setup > Easy Config Wizard.
From the Application dropdown list, select SIP Trunk ↔ Microsoft Teams.
Configure per the field definitions below and click Next.
Scenario Field DefinitionsField Description Scenario Parameters Application Configuration template used: SIP Trunk ↔ Microsoft Teams. Scenario Description Name to describe the setup.
NoteThe Easy Config adds the scenario description as a prefix for all SBC configuration elements created for this deployment.
Telephone Country Country in which SIP Trunk ↔ Microsoft Teams is setup. Emergency Services Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options:
- ELIN Identifier
- E911/E112
- None
NoteThe E911 ELIN number from the "CompanyName" field configured in Skype location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Skype Setup. For more information, see Creating and Modifying Entries to Transformation Tables.
Emergency Callback Number 1 First Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. Emergency Callback Number 2 Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. PSAP Number Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services. SIP Sessions Number of simultaneous SIP Sessions. Valid entry: 1 - 960. SIP Trunk Name The SIP trunk used for connection to the Microsoft Teams environment. For SBC 1000/2000 and SBC SWe Edge, valid options are:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- SoftBank ConnecTalk
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Twilio SIP Trunk
- Verizon SIP Trunk
The SIP Trunk selected determines the field options displayed in Step 2. For more information, see Step 2 - Configure SIP Details for Endpoint.
Microsoft Teams Teams Connection The Teams connection type used for the network. Valid options:
- Teams Direct Routing
- Teams Downstream SBC
Step 2 - Configure SIP Details for Endpoint
Easy Configuration Step 2 includes configuration for the SIP Trunk endpoint.
Start
- Configure the SIP trunk provider information (see below for field definitions for each available SIP Trunk provider).
- Configure the connection type information (see below for field definitions).
- Click Next.
ATT SIP Trunk - Field Definitions
These fields apply if you selected ATT SIP Trunk in Step 1 - Select Scenario.
ATT SIP Trunk Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
ATT SIP Trunk Microsoft Teams: Teams Direct Routing - Local Media Optimization
ATT SIP Trunk Microsoft Teams: Teams Downstream SBC
ATT SIP Trunk Field Definitions
| Field | Description |
|---|---|
SIP Trunk: ATT SIP Trunk | |
Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid options:
|
| Port Number | The port number for the SIP server used to send and receive SIP messages between the SBC and the Border Element Server. |
| Use Secondary Border Element Server | Enables or disables the secondary Remote Peer service provider configured. |
| Secondary Border Element Server | Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
| Protocol | The Protocol used for communicating with the Secondary Border Element Server. Valid options:
This field is available only when Use Secondary Border Element Server is Enabled. |
| Port Number | The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
| AT&T Simultaneous Ring Supported (AT&T Services) | Indicates whether the AT&T Simultaneous Ring feature is supported. Valid options:
|
| AT&T IP Toll Free | Indicates whether the AT&T Toll Free option is enabled or disabled. Valid options:
|
| IP Toll Free Access Number | The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
KDDI SIP Trunk Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
KDDI SIP Trunk Microsoft Teams: Teams Direct Routing - Local Media Optimization
KDDI SIP Trunk Microsoft Teams: Teams Downstream SBC
KDDI SIP Trunk Field Definitions
Field | Description |
|---|---|
SIP Trunk: KDDI SIP Trunk | |
| SIP Server | Type the FQDN for the service provider's SIP server. |
| Protocol | Hard-coded to UDP. |
| Port Number | Hard-coded value for the port used for UDP: 5061. |
| Main Telephone Number | The main telephone number associated with the KDDI SIP trunk. |
| Called Prefix (FMC Service) | Type the city code and office code for setting up transformation rules for the FMC service. |
| Address of Record URI (Contact Registrant Entry) | Type the Address of Record of the client that is registered on the SIP server. |
| Static Host (SIP Profile) | Type the host and port information for the FQDN or IP address used in the From Header. Valid entries:
|
| Authentication ID (Remote Authorization Entry) | Specifies a user name to use in response to a challenge. |
| Enter Password | The password for the Authentication ID. |
| Confirm Password | Re-enter the password for the Authentication ID. |
| DNS Server IP (Split DNS Table) | Click Add Split DNS Entry |
| Domain Name | Specify the domain name associated with the DNS IP address.
|
| Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink in Step 1 - Select Scenario.
NTT DOCOMO Officelink Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
NTT DOCOMO Officelink Microsoft Teams: Teams Direct Routing - Local Media Optimization
NTT DOCOMO Officelink Microsoft Teams: Teams Downstream SBC
NTT DOCOMO Officelink Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: NTT DOCOMO Officelink | |
| Office Link FOMA-R | The Host IP address of the SIP Server. |
| Protocol | The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Hard-coded value: UDP. |
| Port Number | The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Valid entry: 1024-65535. |
| CUG Domain Name | The FQDN of the SIP Server. |
| Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
Other SIP Trunk - Field Definitions
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
Other SIP Trunk Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
Other SIP Trunk Microsoft Teams: Teams Direct Routing - Local Media Optimization
Other SIP Trunk Microsoft Teams: Teams Downstream SBC
Other SIP Trunk Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: Other SIP Trunk | |
| Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid options:
|
| Port Number | The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
| Use Secondary Border Element Server | Enables or disables the secondary Remote Peer service provider configured. |
| Secondary Border Element Server | The FQDN or IP address used for specifying the Secondary Border Element service provider. This field is available only when Use Secondary Border Element Server is Enabled. |
| Protocol | The Protocol used for communicating with the Secondary Border Element Server. Valid options:
This field is available only when Use Secondary Border Element Server is Enabled. |
| Port Number | The Port Number used for sending and receiving messages between SBC and the Secondary Border Element Server. This field is available only when Use Secondary Border Element Server is Enabled. |
| Microsoft Teams: Teams Direct Routing | |
Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an ACL (Access Control List) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type - Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
SoftBank ConnecTalk - Field Definitions
These fields apply if you select SoftBank ConnecTalk in Step 1 - Select Scenario.
SoftBank ConnecTalk Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
SoftBank ConnecTalk Microsoft Teams: Teams Direct Routing - Local Media Optimization
SoftBank ConnecTalk Microsoft Teams: Teams Downstream SBC
SoftBank ConnecTalk Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: SoftBank ConnecTalk | |
| Primary SIP Server | The host FQDN of the primary SIP server. |
| Secondary SIP Server | The host FQDN of the secondary SIP server. |
| WAN Link | The method to connect networks. Valid options:
|
| Signaling/Media Source IP | The user-specified IP address for SIP signaling messages. |
| Gateway ID (Remote Authorization Entry) | The ID that authenticates with the router at the gateway of the network. |
| Gateway Password | The password that authenticates with the router at the gateway of the network. |
| Confirm Password | Re-enter the password for the router that serves as the network gateway. |
| From/To Header Host (SIP Profile and Contact Registrant Entry) | The IP or FQDN of the SIP Profile and Contact Registrant Table. |
| Contact Header URI | This field automatically generates using the Gateway ID at the From/To Header Host. |
| Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows you to configure the SBC behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If you enable this field, you must configure the Public IP address field. Valid options:
Note
You must enable this field when the SBC interface has a private IP and the NAT device uses a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all outgoing messages. This field appears only if you enable Outbound NAT Traversal. |
| Apply ACL | Specifies whether an Access Control List (ACL) applies to the Microsoft Teams connection. An ACL provides security to an SBC that uses a Public IP. Valid options:
For details on configuring an ACL to apply to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for the protocol that the SBC uses with the federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port that the SBC uses for the TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
SoftBank White Office Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
SoftBank White Office Microsoft Teams: Teams Direct Routing - Local Media Optimization
SoftBank White Office Microsoft Teams: Teams Downstream SBC
SoftBank White Office Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: SoftBank White Office | |
| WAN Link | The method used for connecting networks. Options are:
On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only. |
| Signaling/Media Source IP | Click the arrow and select the user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router. |
| SIP Server | The host IP address or FQDN for the SIP server. |
| Gateway ID (Remote Authorization Entry) | The ID used for authenticating with the router at the gateway of the network. |
| Gateway Password | The password used for authenticating with the router at the gateway of the network. |
| Confirm Password | Re-entry of the password for the router serving as network gateway. |
| Address of Record URI (Contact Registrant Entry) | The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, enter GatewayID@SIPServer. |
| Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Telstra Enterprise SIP Connect Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
Telstra Enterprise SIP Connect Microsoft Teams: Teams Direct Routing - Local Media Optimization
Telstra Enterprise SIP Connect Microsoft Teams: Teams Downstream SBC
Telstra Enterprise SIP Connect Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: Telstra Enterprise SIP Connect | |
| NAT Public Interface | The public interface used for Network Address Translation (NAT). |
| State | The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include:
|
| Protocol and Port | Hard-coded as UDP 5060. |
| SIP Connect DNS IP | The IPv4 address used to create a Split DNS entry for the Telstra domain. |
| SIP Connect Domain/Realm | The SIP Connect Domain or Realm to which the specified IP address will map. |
| Authentication User ID (SIP Connect Authentication) | The User ID for use in authentication. |
| Authentication Password | The password to use when authenticating with the User ID. |
| Confirm Password | The re-entered password for confirmation. |
| Trunk Pilot Number | The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service. |
| Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
Twilio SIP Trunk - Field Definitions
These fields apply if you selected Twilio SIP Trunk in Step 1 - Select Scenario.
Twilio SIP Trunk Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
Twilio SIP Trunk Microsoft Teams: Teams Direct Routing - Local Media Optimization
Twilio SIP Trunk Microsoft Teams: Teams Downstream SBC
Twilio SIP Trunk Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: Twilio SIP Trunk | |
| Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid options:
|
| Port Number | The port number for the SIP server used to send and receive SIP messages between the SBC and the Border Element Server. |
| Use Secondary Border Element Server | Enables or disables the secondary Remote Peer service provider configured. |
| Secondary Border Element Server | The IP address or FQDN for specifying the Secondary Border Element service provider. This field is available only when Use Secondary Border Element Server is Enabled. |
| Protocol | The Protocol used for communicating with the Secondary Border Element Server. Valid options:
This field is available only when Use Secondary Border Element Server is Enabled. |
| Port Number | The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
| Signaling/Media Source IP | Select the external (Internet-facing) IP address for the server that handles routing of messages for signaling and media. |
| Outbound NAT IP | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Microsoft Teams: Teams Direct Routing | |
| Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.
Verizon SIP Trunk Microsoft Teams: Teams Direct Routing - Standalone Direct Connection
Verizon SIP Trunk Microsoft Teams: Teams Direct Routing - Local Media Optimization
Verizon SIP Trunk Microsoft Teams: Teams Downstream SBC
Verizon SIP Trunk Field Definitions
| Field | Description |
|---|---|
| SIP Trunk: Verizon SIP Trunk | |
| Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP. |
| Port Number | The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server. |
| Microsoft Teams: Teams Direct Routing | |
Teams Connection Type: Standalone Direct Connection | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Teams Connection Type: Local Media Optimization (Microsoft Teams Direct Routing media flow uses the shortest path to improve the SBC Edge's media quality and bandwidth usage) | |
| Signaling/Media Source IP (Teams Attributes) | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Private Media Source IP | Private IP address that handles routing of messages for media. |
| Outbound NAT Traversal | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid options:
Note
This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
| Public IP Address | Specifies the Public IP address of the NAT device. The SBC uses this IP as the source IP for all the outgoing messages. This field is required only when Outbound NAT Traversal is configured to Enable. |
| Apply ACL | Specifies whether an Access Control List (ACL) is applied to the Microsoft Teams connection. An ACL provides security to an SBC using a Public IP. Valid options:
For details on configuring an ACL to be applied to an SBC, refer to Managing Access Control Lists. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Server Port Number | Hard-coded value for the port used for TLS: 5061. |
| Listening Port Number | Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. |
| Protocol (Downstream Attributes) | Hard-coded value for protocol used with federated FQDN: TLS. |
| Downstream SBC Signaling Listen Port | Port number used for sending and receiving SIP messages between the Downstream SBC and the Border Element Server. Valid entry: 1024-65535. |
| Max. Users per Downstream SBC | Maximum number of users per Downstream SBC. Valid entry: 1 - 1000. |
| Microsoft Teams: Teams Downstream SBC | |
| Signaling/Media Source IP | External (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media. |
| Teams Proxy SBC | The IP/FQDN for the Proxy SBC for TLX to properly establish. |
| Protocol | Hard-coded value for protocol used with federated FQDN: TLS. |
| Port Number | The port used for TLS. Valid entry: 1024 - 65535. |
| SBC FQDN | FQDN for the SBC. |
Step 3 - Confirm and Submit Configuration
This step displays a summary of the the configuration items from Step 1 and Step 2.
Start
- Click Finish.
This example displays a SIP Trunk ↔ Microsoft Teams with an Other SIP Trunk type.
Overview
Content Tools