In this section:

Overview

The SBC Easy Configuration interface includes a built-in, step-by-step setup configuration wizard to enable quick and easy deployment of a partially configured signaling group with a new single end-point scenario for UCaaS. This deployment is configurable within various network configurations, such as Skype for Business or Teams in a Microsoft On Premises environment.

For the single end-point configuration, since the peer end is not known/configured, in the Easy Configuration Wizard, the Transformation and Routing entries for the endpoint being configured are created independent of the peer end. If you have two endpoints connected and use the Single Leg Wizard to add the third endpoint, you'll need to create/modify the Transformation and Routing entries to complete routing.

Easy Configuration Wizard - Single Leg Configuration Notes

  • Use the single leg wizard to add a 3rd, 4th, or 5th peer to a device, when at least two legs are already configured via the standard Easy Configuration Wizard.
  • Emergency configuration is not supported for single end scenarios.

Step 1: Select SIP Trunk Type

Easy Configuration Step 1 includes configuration for Scenario Parameters and SIP Trunk type.

  1. In the WebUI, click the Tasks tab.
  2. In the left navigation panel, go to SBC Easy Setup > Easy Config Wizard.

  3. From the Application drop down list, select  UCaaS.

  4. Configure per the field definitions below and click Next. 



    Configure Scenario Parameters - Field Definitions

    FieldDescription
    ApplicationConfiguration template used: SIP Trunk.
    Scenario DescriptionName to describe the setup.
    Telephone CountryCountry in which the SIP Trunk is setup.
    SIP SessionsNumber of simultaneous SIP Sessions. Valid entry: 1 - 960.
    UCaaSBy default, the user type is hard coded to Zoom.

Step 2:  Configure UCAAS Details for Endpoint

Easy Configuration Step 2 includes configuration for the uCaaS endpoint. See below for configuration.

  1. Configure the UCaaS: Zoom information (see below for field definitions).

  2. Click Next. 



    Configure SIP Trunk: UCaaS Zoom

    FieldDescription
    Signaling/Media Source IP The external (Internet-facing) IP address of the Microsoft Teams Direct Routing server that handles routing of messages for signaling and media.
    HostThe IP/FQDN address used for Zoom. Valid entry: FQDN or IP.
    Port NumberThe port used for Zoom.  Valid entry: 1024 - 65535.

Step 3: Summary

Easy Configuration Step 3 includes a summary of the information configured in Step 1 and Step 3.

Review the information and click Finish.