PUT snmptargetaddress id

REST API Method: PUT /rest/snmptargetaddress/{identifier}

Creates a SNMP Management Addresses Table given a specific Table ID.

The SBC Edge Portfolio allows you to define up to 10 SNMP management addresses.

https://192.168.0.111/rest/snmptargetaddress/{identifier}

PUT

true

snmptargetaddress - REST API Methods

Parameter Name	Required	Service Affecting	Data Type	Default Value	Possible Values	Description
sCommType	No	No	Enum	1	Possible values: 0 - snmpCommNone 1 - snmpReadOnly 2 - snmpreadWrite	SNMP community type. Only 'snmpReadOnly' is supported.
snmpCommunity	Yes	No	string	none	128 - Max Length	SNMP community used for communicating with the manager.
snmpMgrAddr	Yes	No	string	none	256 - Max Length	SNMP manager address(IP address or FQDN)
snmpTrapEnable	Yes	No	int	1	Possible values: 0 - Minimum 1 - Maximum	Indicates if this manager accepts the traps. Default set to enabled(1), but can be disabled(0).
snmpVersion	Yes	No	Enum	0	Possible values: 0 - snmpV2 1 - snmpV3	SNMP version to use for this SNMP manager.
usmUsername	Yes	No	string	none	32 - Max Length	USM username for SNMP v3 Manager.
authProtocol	Yes	No	Enum	2	Possible values: 0 - authNone 1 - authMD5 2 - authSHA1	Authorization Protocol for this SNMP manager.
EncryptedAuthPassphrase	Yes	No	string	none	128 - Max Length	Authorization passphrase for this SNMP manager.
privProtocol	Yes	No	Enum	1	Possible values: 0 - privNone 1 - privAES128	Privacy Protocol for this SNMP manager.
EncryptedPrivPassphrase	Yes	No	string	none	128 - Max Length	Privacy passphrase for this SNMP manager.