REST API Method: PUT /rest/radiusserver/{identifier}

Createsthe entry in the Radius Server Table given a specific Table ID.

URL:

https://192.168.0.111/rest/radiusserver/{identifier}

HTTP Method

PUT

Requires Authentication:

true

radiusserver - REST API Methods

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
DescriptionYesNostringnone64 - Max Length Specifies the RADIUS server description for easy referent in the general configuration section.
RadiusServerYesYesstringnone256 - Max Length Specifies the RADIUS server IP address or Fully Qualified Domain Name (FQDN) for connecting with this server.
PortYesYesint1812 Specifies the communications port to use for connecting to the RADIUS server.
EncryptedSharedSecretYesYesstringnone256 - Max Length Specifies the shared secret to use (as specified in the RADIUS client configuration) to communicate with the RADIUS server.
SendConnectivityPacketYesYesEnum0Possible values:
  • 0 - eStatusServer
  • 1 - eRequest
 Controls which RADIUS packet type to send to the server on verifying the network connectivity. The server connectivity status is declared to be up on successful reception of a response. Likewise, the server connectivity status is declared to be down on event there is no response from the server. Status-Server (RFC 5997)*
- Periodically sends Status-Server packet every minute as "keep-alive" ping to verify and declare the server connectivity status. Request*
- Sends an Access-Request or Accounting-Request packet to verify and declare the authentication or accounting server connectivity status respectively on-demand.

  • No labels