PUT enmsignalingprofile id

REST API Method: PUT /rest/enmsignalingprofile/{identifier}

Creates a CAS E and M Signaling Profile given a specific ID.

Note

The CAS E and M Signaling Profile identifier can only be within the range 10001-15000 (inclusive)

https://192.168.0.111/rest/enmsignalingprofile/{identifier}

PUT

true

enmsignalingprofile - REST API Methods

Parameter Name	Required	Service Affecting	Data Type	Default Value	Possible Values	Description
Description	No	No	string	none	64 - Max Length	A description of the profile.
Orientation	Yes	No	Enum	0	Possible values: 0 - eCas_User 1 - eCas_Network	Set the CAS signaling orientation. Set to User if connected to a PSTN; Set to Network if connected to a PBX.
IncomingStartDial	Yes	No	Enum	0	Possible values: 0 - eCas_EmWinkStart 1 - eCas_EmImmediateDialing	Used to configure the type of E&M protocol for incoming calls.
OutgoingStartDial	Yes	No	Enum	0	Possible values: 0 - eCas_EmWinkStart 1 - eCas_EmImmediateDialing	Used to configure the type of E&M protocol for outgoing calls.
DTMFOnTime	Yes	No	int	100	Possible values: 45 - Minimum 250 - Maximum	Used to set how long DTMF tones are on. The value specifies the time in milliseconds.
DTMFOffTime	Yes	No	int	100	Possible values: 45 - Minimum 250 - Maximum	Used to set how long DTMF tones are off. The value specifies the time in milliseconds.
InterDigitTimeout	Yes	No	int	500	Possible values: 250 - Minimum 30000 - Maximum	Used to set the timeout time between dialed numbers. The value specifies the timeout period in milliseconds.