Parameters
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| EnableCAC | No | No | Enum | 1 | Possible values:
| Allows to enable and disable SIP Call Admission Control. |
| SkypePresenceClusterId | No | No | int | 0 | Possible values:
| When 0, Skype/Lync Presence is disabled When non-0, represents the Skype/Lync Presence Server. Transport Type must be TLS, with mutual authentication enabled. |
| SourceIPUntrustedAlarm | No | No | Enum | 0 | Possible values:
| When 1, the alarm is raised if an INVITE is received from an untrusted source. When 0, the alarm is not raised (disabled) |
| SkypeEdgeServerClusterId | No | No | int | 0 | Possible values:
| When 0, Skype/Lync Edge Server is disabled When non-0, represents the Skype/Lync Edge Server. Transport Type must be TLS. When non-0, Service message will be sent to the selected Edge server to gather TURN server security tokens. This is applicable only for the SBC 1000/2000 platforms. |
| TokenDuration | No | No | int | 480 | Possible values:
|
Specifies the number of minutes the security tokens are valid which are recieved from Skype/Lync Edge server.
This is applicable only for the SBC 1000/2000 platforms.
This option is available when Edge Server is Enabled. |
| UserInfoDecodePref | No | No | Enum | 0 | Possible values:
| Selects how to decode UserInfo header: Legacy does not pass through anything past and including ';' RFC3261 passes through all legal values. |
Helpful Tip
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource
Overview
Content Tools