Parameters
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| Description | Yes | No | string | none | 64 - Max Length | Specifies the RADIUS server description for easy referent in the general configuration section. |
| RadiusServer | Yes | Yes | string | none | 256 - Max Length | Specifies the RADIUS server IP address or Fully Qualified Domain Name (FQDN) for connecting with this server. |
| Port | Yes | Yes | int | 1812 | Specifies the communications port to use for connecting to the RADIUS server. | |
| EncryptedSharedSecret | Yes | Yes | string | none | 256 - Max Length | Specifies the shared secret to use (as specified in the RADIUS client configuration) to communicate with the RADIUS server. |
| SendConnectivityPacket | Yes | Yes | Enum | 0 | Possible values:
|
Controls which RADIUS packet type to send to the server on verifying the network connectivity.
The server connectivity status is declared to be up on successful reception of a response.
Likewise, the server connectivity status is declared to be down on event there is no response from the server.
Status-Server (RFC 5997)* - Periodically sends Status-Server packet every minute as "keep-alive" ping to verify and declare the server connectivity status. Request* - Sends an Access-Request or Accounting-Request packet to verify and declare the authentication or accounting server connectivity status respectively on-demand. |
Helpful Tip
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource
Overview
Content Tools