REST API Method: POST /rest/ds1portgroup

Modifies a DS1 Port Group on the SBC. The port types have to be modified in groups of ports. Failing to do so, might result in inconsistent behavior.

For SBC 2000, the grouping is based on whether the card is a 8-port card, 4-port card or a 2-port card. The grouping is sets of 4 or 2.

  • In an 8-port card, the groups are ports 1-4 and ports 5-8.
  • In a 4-port card, the group is ports 1-4.
  • In a 2-port card, the group is ports 1-2.
For SBC 1000, only ports on Card 7 and 8 are DS1 ports and can be used in this resource, depending on which interface ports need to be modified.

URL:

https://192.168.0.111/rest/ds1portgroup

HTTP Method

POST

Requires Authentication:

true

ds1portgroup - REST API Methods

Parameters

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
CardOneGroupOneTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 1:1-1:4, if interface card 1 is a 4-port or 8-port card. If interface card 1 is a 2-port card, then this identifies the port type for ports 1:1 and 1:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardOneGroupTwoTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 1:5-1:8, if interface card 1 is an 8-port card. If interface card 1 is a 2-port or 4-port card, then this is not applicable. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardTwoGroupOneTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 2:1-2:4, if interface card 2 is a 4-port or 8-port card. If interface card 2 is a 2-port card, then this identifies the port type for ports 2:1 and 2:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardTwoGroupTwoTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 2:5-2:8, if interface card 2 is an 8-port card. If interface card 2 is a 2-port or 4-port card, then this is not applicable. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 2000.

CardSevenTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for ports 7:1 and 7:2. If the DS1 type of these ports is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 1000.

CardEightTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type for port 8:1, if interface card 8 is present. If the DS1 type of this port is not being modified then this attribute may be omitted from the request.

This is applicable only in SBC 1000.

PortTypeYesYesisdn_tip:PORT_PHYSICAL_TYPE Identifies the port type to which all DS1 ports on the system should be configured. If this attribute is set then it will override all the individual card-and-group attributes, which will not need to be sent with the request. If you wish to use individual card-and-group settings, for example if you need some ports set to T1 and others to E1, then you must omit this attribute from the request.

This is applicable to both the SBC 1000 and 2000.

Helpful Tip

The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource

  • No labels