Use the Hard Disk Status window to view the status of the hard disk in the server.
On the SBC main screen, go to Troubleshooting > Troubleshooting Tools > System Status and Usage > Hard Disk Status or
Monitoring > System > Category: Hardware Status > Hard Disk > Hard Disk Status or
All > System > Hard Disk Status
The Hard Disk Status window is displayed.
The following output is displayed:
Hard Disk Status Parameters
Parameter | Description |
---|
Server Name | Name of the server. |
Disk Number | Indicated the hard disk number (typically 0 through 3). |
Present | Indicates if the hard disk exists. |
Product ID | Indicates the product ID of the hard disk as assigned by the vendor. |
Revision | Revision of the hard disk as assigned by the vendor. |
Capacity | Indicates the capacity of the disk. |
Disk Status | Indicates if the disk is online/failed. |
Health Test | Specifies the overall health of the device |
Disk Life Remaining | Specifies a calculated percentage estimating the life remaining of the device or N/A if not supported by the device. |