In this section:

The command syntax and parameters of the objects related to the show table oam command is shown below.

 

Accounting

Command Syntax

> show table oam accounting
	admin
		earlyAttemptState
		eventAcctMethods
		eventAcctPsxInfoState
		eventAcctState
		generationMode
		intermediateAcctInterval
		intermediateAcctMode
		intermediateAcctState 
		intermediateLongDurGenTime 
		intermediateLongDurThreshold 
		intermediateTrapState 
		maxRecordSequenceNum 
		populateIpTgFarEndSwitchType 
		populateNonPortedLnpNumbers 
		populateRemoteGsxInfoState 
		secondStageInheritFirstStage
		sendEgressCdrInfoOnReceipt
		startAcctState
	cdrServer
		admin
			type
			ipAddress
			cdrPort
			useSshKeyFile
			username
			password
			path
			filePrefix
			filePostfix
			connectionTimeout
			transferTimeout
			bufferSize
		status <primary or secondary>
			failedTransfers
			pendingTransfers
			progress 
			state
			successfulTransfers
	radius
		accountingAdmin
			failoverPolicy
			maxErrorRate 
			maxNoResponseTime 
			maxPacketRetryCount 
			maxQueuedPacketsInMemory 
			nasIdentifier
			nasIpAddress 
			radiusUserDetails
            sendNasIdentifier
			sendNasIpAddress
			state
		radiusServer
		radiusServerStatus

Command Parameters

Shared Accounting Parameters - 'show status oam' and 'show table oam'

Parameter

Description

admin

Call CDR configuration.

  • earlyAttemptState – Identifies whether early ATTEMPT accounting is enabled or disabled.
  • eventAcctMethods – Log event records for the methods specified in the configuration.

  • eventAcctPsxInfoState – EVENT records relating to PSX are generated if enabled.

  • eventAcctState – EVENT records are generated if enabled.

  • generationMode – Identifies the accounting generation mode for the node.
  • intermediateAcctInterval – Identifies the Intermediate Accounting Interval in seconds
    NOTE: this object is only applicable when sonusAcctIntAcctMode is set to "interval(1)".
  • intermediateAcctMode – Identifies the intermediate record generation mode for the node.
  • intermediateAcctState – Identifies whether Intermediate Accounting is Enabled or Disabled for the Node
  • intermediateLongDurGenTime – Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records.
  • intermediateLongDurThreshold – Identifies the Accounting Intermediate Records Duration in hours.
  • intermediateTrapState – Identifies whether a trap will be generated whenever an INTERMEDIATE record is generated.
  • maxRecordSequenceNum – Specifies the maximum record sequence number for logging the CDR records.
  • populateIpTgFarEndSwitchType Specifies whether or not Ingress Far End Switch Type is used to passed down from the PSX the IP trunk group for SIP ingress calls.
  • populateNonPortedLnpNumbers – Specifies whether or not to populate the Called Number Before Translation field in the accounting record under the following conditions:
    1) for a number for which an LNP lookup was performed
    2) the lookup indicated that the number has not been ported.
  • populateRemoteGsxInfoState - Identifies whether a destination SBC propagates its billing data to originating GSX/SBC for GW-GW calls.
  • secondStageInheritFirstStage - This indicates whether or not second stage accounting records for two-stage calls inherit fields from the first stage call.
  • sendEgressCdrInfoOnReceipt - This indicates whether or not to send the egress CDR info immediately after receiving and processing it.
  • startAcctState - Identifies whether Start Accounting is enabled or disabled for the node.
cdrServer

Configuration for external CDR servers.

  • admin (not available with 'show status' command)
    • type
    • ipAddress
    • cdrPort
    • useSshKeyFile
    • username
    • password
    • path
    • filePrefix
    • filePostfix
    • connectionTimeout
    • transferTimeout
    • bufferSize
    • status
    • type
    • state
    • progress
    • successfulTransfers
    • failedTransfers
    • pendingTransfers
radius

Configuration for external Radius servers. 

  • accountingAdmin
    • failoverPolicy
    • maxErrorRate
    • maxNoResponseTime
    • maxPacketRetryCount
    • maxQueuedPacketsInMemory
    • nasIdentifier
    • nasIpAddress
    • sendNasIdentifier
    • sendNasIpAddress
    • state
  • radiusServer
  • radiusServerStatus
  • radiusUserDetails

Alarms

Command Syntax

> show table oam alarms
	ethernetCrcErrAlarm
	ethernetCrcErrAlarmStatus
	ipPolicingAlarmAdmin
		majorAlarmMode
		majorAlarmProfileName
		minorAlarmMode
		minorAlarmProfileName
	ipPolicingAlarmStatus
		aclAlarmDuration 
		aclAlarmLevel 
		aclDiscardRate 
		aclPacketsAccepted 
		aclPacketsDiscarded 
		aggregateAlarmDuration 
		aggregateAlarmLevel 
		aggregateDiscardRate 
		aggregatePacketsAccepted 
		aggregatePacketsDiscarded 
		arpAlarmDuration 
		arpAlarmLevel 
		arpDiscardRate 
		arpPacketsAccepted 
		arpPacketsDiscarded 
		badEthernetIpHeaderAlarmDuration 
		badEthernetIpHeaderAlarmLevel 
		badEthernetIpHeaderDiscardRate 
		badEthernetIpHeaderPacketsDiscarded 
		discardRuleAlarmDuration 
		discardRuleAlarmLevel 
		discardRuleDiscardRate 
		discardRulePacketsDiscarded 
		ipSecDecryptAlarmDuration 
		ipSecDecryptAlarmLevel 
		ipSecDecryptDiscardRate 
		ipSecDecryptPacketsDiscarded 
		mediaAlarmDuration 
		mediaAlarmLevel 
		mediaDiscardRate 
		mediaPacketsDiscarded 
		rogueMediaAlarmDuration 
		rogueMediaAlarmLevel 
		rogueMediaDiscardRate 
		rogueMediaPacketsDiscarded
        srtpDecryptAlarmDuration
        srtpDecryptAlarmLevel
        srtpDecryptDiscardRate
        srtpDecryptPacketsDiscarded 
		uFlowAlarmDuration 
		uFlowAlarmLevel
		uFlowDiscardRate
		uFlowPacketsAccepted
		uFlowPacketsDiscarded
	mediaSrtpErrAlarm
	mediaSrtpErrAlarmStatus

Command Parameters

Shared Alarm Parameters - 'show status oam' and 'show table oam'

Parameter

Description

ethernetCrcErrAlarm This table contains Ethernet CRC error alarm configuration.
ethernetCrcErrAlarmStatus

This table contains the Ethernet CRC error alarm status, with following fields:

  • <interface name>
  • currentErrRate
  • maxErrRate
  • totalCrcErrors
  • numAlarmsRaised
  • currentAlarmState
ipPolicingAlarmAdmin

This table contains system policer alarm configuration.

  • majorAlarmMode
  • majorAlarmProfileName 
  • minorAlarmMode 
  • minorAlarmProfileName
ipPolicingAlarmStatus

This table contains system policer alarm status. 

  • aclAlarmDuration 
  • aclAlarmLevel 
  • aclDiscardRate 
  • aclPacketsAccepted 
  • aclPacketsDiscarded 
  • aggregateAlarmDuration 
  • aggregateAlarmLevel 
  • aggregateDiscardRate 
  • aggregatePacketsAccepted 
  • aggregatePacketsDiscarded 
  • arpAlarmDuration 
  • arpAlarmLevel 
  • arpDiscardRate 
  • arpPacketsAccepted 
  • arpPacketsDiscarded 
  • badEthernetIpHeaderAlarmDuration 
  • badEthernetIpHeaderAlarmLevel 
  • badEthernetIpHeaderDiscardRate 
  • badEthernetIpHeaderPacketsDiscarded 
  • discardRuleAlarmDuration 
  • discardRuleAlarmLevel 
  • discardRuleDiscardRate 
  • discardRulePacketsDiscarded 
  • ipSecDecryptAlarmDuration 
  • ipSecDecryptAlarmLevel 
  • ipSecDecryptDiscardRate 
  • ipSecDecryptPacketsDiscarded 
  • mediaAlarmDuration 
  • mediaAlarmLevel 
  • mediaDiscardRate 
  • mediaPacketsDiscarded 
  • rogueMediaAlarmDuration 
  • rogueMediaAlarmLevel 
  • rogueMediaDiscardRate 
  • rogueMediaPacketsDiscarded
  • srtpDecryptAlarmDuration
  • srtpDecryptAlarmLevel
  • srtpDecryptDiscardRate
  • srtpDecryptPacketsDiscarded
  • uFlowAlarmDuration 
  • uFlowAlarmLevel
  • uFlowDiscardRate
  • uFlowPacketsAccepted
  • uFlowPacketsDiscarded
mediaSrtpErrAlarm

This table contains Media SRTP Authorization error alarm configuration.

mediaSrtpErrAlarmStatus

This table contains the Media SRTP authorization error alarm status, with following fields:

  • <system name>
  • currentErrRate
  • maxErrRate
  • totalSrtpErrors
  • numAlarmsRaised
  • currentAlarmState

EMA

Command Syntax

> show table oam ema clientAuthMethod

Command Parameter

EMA Parameter - 'show table oam' only

Parameter

Description

clientAuthMethod Show EMA current setting of client authorization method.

Event Log

Command Syntax

> show table oam eventLog
	confdDebugLevel
	dataAgentAdmin
	dataAgentStatus
	filterAdmin
	filterStatus
	memusage
	platformAuditLogs
	platformRsyslog
    subsystemAdmin
	typeAdmin
	typeStatus

Command Parameters

Shared Event Log Parameters - 'show status oam' and 'show table oam'

Parameter

Description

confdDebugLevelCurrent debug level for ConfD components.

dataAgentAdmin

Configuration for sending logs to a remote data warehouse.
dataAgentStatusStatus of the remote data warehouse.
filterAdminEvent Log Class Filter configuration table per card, with following fields (not available for 'show status' command) :
  • ceName
  • type – event type
  • eventClass
  • level
  • state
filterStatus

Event Log Class Filter status table per card, with following fields: 

  • ceName
  • type – event type
  • eventClass
  • eventsFiltered – Number of events filtered for the associated event type and class.

memusage

Process memory usage logging controls.
platformAuditLogs

Platform audit logs configuration.

  • state – Administrative state of platform audit logging.

Note: Not availiable for 'show status' command.

platformRsyslog

Syslog configuration for platform Linux logs, with the fields:

  • syslogState 
  • servers (table) 
  • linuxLogs (table) 

Note: Not available for 'show status' command.

subsystemAdmin

Subsystem Event Logging configuration table, with the fields (not available for 'show status' command):

  • ceName
  • systemId
  • infoLogState
  • minEventId
  • maxEventId
typeAdmin

Event Log configuration table for configuration items related to each Event Log type, with following fields (not available for 'show status' command):

  • type
  • state
  • fileCount
  • fileSize
  • messageQueueSize
  • saveTo
  • filterLevel
  • rolloverStartTime
  • rolloverInterval
  • rolloverType
  • rolloverAction
  • fileWriteMode
  • syslogState
  • renameOpenFiles
  • diskThrottleLimit
  • eventLogValidation
  • serverNo
    • syslogRemoteHost
    • syslogRemoteProtocol
    • syslogRemotePort
typeStatus 

Event Log status table for status items related to each Event Log type, with following fields:

  • type
  • currentFile
  • fileRecords
  • fileBytes
  • totalFiles
  • totalFileBytes
  • filesDropped
  • nextRollover
  • logDestination
  • lastFileDrop
  • infoLevelLoggingDisabled

LDAP Authentication

The OAM statistic, ldapAuthentication, provides LDAP server status details.

Command Syntax

% show table oam ldapAuthentication ldapStatus

Command Parameters

ParameterDescription
ldapStatus

LDAP server status details. The following fields are included.

  • serverName – LDAP server name
  • status – Either available or unavailable
  • availableAt – The time when the server is automatically put back into the "available" state.


Local Auth

Command Syntax

> show table oam localAuth 
	user
	userStatus 

Command Parameters

Shared Local Auth Parameters - 'show status oam' and 'show table oam'

Parameter

Description

user

AAA services management, with following fields:

  • name – User name.
  • group – The group that the user is a member of.
  • accountAgingState – The state of account expiry for the user.

  • interactiveAccess – Whether the user is allowed to access interactive interfaces like CLI/EMA.

  • m2mAccess – Whether the user is allowed to access machine to machine interfaces like REST.

  • passwordAgingState – The state of password expiry for the user.

  • passwordLoginSupport – Whether the user is allowed to login using password.

userStatus

Current status of the specified user, with following fields:

  • name – User name.
  • currentStatus – Current status of the user account.
  • userId – User ID number.

Radius Authentication

Command Syntax

> show table oam radiusAuthentication
	radiusServer
	radiusStatus
	retryCriteria

Command Parameters

CLI Statistics Details for 'show status'

ParameterDetails

radiusServer

Displays RADIUS server name of each server. The following field is included.

  •  radiusServer – Name of radius server
radiusStatus

RADIUS server status details. The following fields are included.

  • status –  Either available or unavailable
  • availableAt – The time when the server is automatically put back into 'available' state.

CLI Statistics Details for 'show table'

ParameterDetails

radiusServer

RADIUS server configuration details of each server. The following field is included.

  • serverName – RADIUS server name
  • priority – The order the SBC uses to attempt RADIUS authentication. The RADIUS server with the lowest priority is contacted first.
  • state – Operational state of the RADIUS server.
  • radiusServerIp – IPv4 address of the RADIUS server.
  • radiusServerPort – The RADIUS server port to which the SBC sends the request.
  • radiusNasIp – IPv4 address of the SBC to send in ACCESS_REQUEST
  • radiusSharedSecret – The shared secret used to encrypt the data exchanged between SBC and RADIUS server.
  • mgmtInterfaceGroup – Name of the Management Interface Group to connect to this RADIUS server.
radiusStatus

RADIUS server status details. The following fields are included.

  • serverNameId – RADIUS server name
  • status – Either available or unavailable
  • availableAt – The time when the server is automatically put back into 'available' state.
retryCriteria

 RADIUS server Retry criteria settings. The following fields are included.

  • retryTimer – Time in milliseconds before the SBC attempts another authentication request.
  • retryCount – Number of retries the SBC uses to attempt authentication.
  • oosDuration – Time in minutes the RADIUS server remains out of service after a timeout.

SNMP

Command Syntax

> show table oam snmp
	community engineId
	trapTarget
        fqdn		
        ipAddress
		port
		state 
		trapType

Command Parameters

Shared SNMP Parameter - 'show status oam' and 'show table oam'

Parameter

Description

community

This table contains SNMP community information.

communityString

This table contains SNMP community strings used in a SNMP request, with following fields:

  • snmpCommunityIndex
  • snmpCommunityName

localEngineId

SNMPv3 SNMP-USER-BASED-SM-MIB usmUserEngineID and SNMP-COMMUNITY-MIB snmpCommunityContextEngineID

securityLevel

SNMPv3 SNMP-VIEW-BASED-ACM-MIB vacmAccessSecurityLevel for all users in model 0 and 3.

trapTarget

Trap target configuration details, with following fields:

  • name
  • fqdn
  • ipAddress
  • port
  • trapType
  • targetUsername
  • targetSecurityLevel
  • state
users

Auth key and Priv key details for each user, with following fields:

  • username
  • group
  • authProtocol
  • authKey
  • privProtocol
  • privKey
version

SNMP version currently supported.

Traps

Command Syntax

> show table oam traps
	admin <traps>
	dspAdmin
		callFailureTrap lackdsp
			interval
			threshold
		dspAvailabilityTrap
			allThreshold
			g711PacketThreshold
			g726Threshold
			g729Threshold

Command Parameters

Traps Parameters - 'show table oam' only

Parameter

Description

admin

The sonusTrapTable identifies the SNMP notifications that this node supports.

  • <trap name>
  • priorityLevel – Lists any user-defined priority levels overriding the default pre-compiled level.

  • state – Determines if this SNMP trap is transmitted to any management client.

dspAdmin  

DSP resource usage trap configuration.

  • callFailureTrap lackdsp– Trap configuration for Call Failure due to no DSP.
    • interval – Indicates the time interval for the threshold of call failure due to lack of DSP pad.

    • threshold – Indicates the number of call failure due to lack of DSP pad threshold.

  • dspAvailabilityTrap– DSP Availability trap threshold configuration.
    • allThreshold – Indicates the percentage DSP Availability threshold for all types.

    • g711PacketThreshold – Indicates the percentage of G711 Packet type DSP Availability threshold.

    • g726Threshold – Indicates the percentage of G726 type DSP Availability threshold.

    • g729Threshold – Indicates the percentage of G729 type DSP Availability threshold.


Command Examples

To view Event Log filter status:

admin@sbx1> show table oam eventLog filterStatus
                   EVENT      EVENTS
CE NAME  TYPE      CLASS      FILTERED
----------------------------------------
cesbx15  system    sysmgmt    509
cesbx15  system    callproc   0
cesbx15  system    resmgmt    1
cesbx15  system    directory  0
cesbx15  system    netmgmt    0
cesbx15  system    signaling  0
cesbx15  system    routing    6
cesbx15  system    trace      0
cesbx15  system    security   0
cesbx15  system    policy     0
cesbx15  system    audit      0
cesbx15  debug     sysmgmt    627259
cesbx15  debug     callproc   0
cesbx15  debug     resmgmt    84365
cesbx15  debug     directory  1
cesbx15  debug     netmgmt    0
cesbx15  debug     signaling  14506502
cesbx15  debug     routing    162
cesbx15  debug     trace      0
cesbx15  debug     security   0
cesbx15  debug     policy     0
cesbx15  debug     audit      0
cesbx15  trace     sysmgmt    0
cesbx15  trace     callproc   0
cesbx15  trace     resmgmt    0
cesbx15  trace     directory  0
cesbx15  trace     netmgmt    0
cesbx15  trace     signaling  0
cesbx15  trace     routing    0
cesbx15  trace     trace      0
cesbx15  trace     security   0
cesbx15  trace     policy     0
cesbx15  trace     audit      0
cesbx15  security  sysmgmt    0
cesbx15  security  callproc   0
cesbx15  security  resmgmt    0
cesbx15  security  directory  0
cesbx15  security  netmgmt    0
cesbx15  security  signaling  0
cesbx15  security  routing    0
cesbx15  security  trace      0
cesbx15  security  security   1
cesbx15  security  policy     0
cesbx15  security  audit      0
cesbx15  audit     sysmgmt    0
cesbx15  audit     callproc   0
cesbx15  audit     resmgmt    0
cesbx15  audit     directory  0
cesbx15  audit     netmgmt    0
cesbx15  audit     signaling  0
cesbx15  audit     routing    0
cesbx15  audit     trace      0
cesbx15  audit     security   0
cesbx15  audit     policy     0
cesbx15  audit     audit      0 


To view Event Log configuration of event log types:

admin@SBXUK11-1> show table oam eventLog typeAdmin
                                MESSAGE                ROLLOVER                                     FILE               RENAME    DISK                           SYSLOG   SYSLOG    SYSLOG
                   FILE   FILE  QUEUE    SAVE  FILTER  START     ROLLOVER                 ROLLOVER  WRITE    SYSLOG    OPEN      THROTTLE  EVENT LOG   SERVER   REMOTE   REMOTE    REMOTE
TYPE      STATE    COUNT  SIZE  SIZE     TO    LEVEL   TIME      INTERVAL  ROLLOVER TYPE  ACTION    MODE     STATE     FILES     LIMIT     VALIDATION  NO       HOST     PROTOCOL  PORT
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
system    enabled  32     2048  10       disk  major   -         0         nonrepetitive  stop      default  disabled  disabled  5000      disabled    server1  0.0.0.0  tcp       514
debug     enabled  32     2048  10       disk  major   -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
trace     enabled  32     2048  10       disk  info    -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
acct      enabled  32     2048  10       disk  major   -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
security  enabled  32     2048  10       disk  major   -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
audit     enabled  32     2048  10       disk  info    -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
packet    enabled  32     2048  10       disk  major   -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
memusage  enabled  32     2048  10       disk  major   -         0         nonrepetitive  stop      default  disabled  disabled  -         disabled    server1  0.0.0.0  tcp       514
[ok][2018-08-13 16:46:32]






To view status items related to each Event Log:

admin@sbx1> show table oam eventLog typeStatus

                                                                                                                INFO     
                                              TOTAL                                                             LEVEL    
          CURRENT      FILE     FILE   TOTAL  FILE   FILES    NEXT      LOG                                     LOGGING  
TYPE      FILE         RECORDS  BYTES  FILES  BYTES  DROPPED  ROLLOVER  DESTINATION  LAST FILE DROP             DISABLED 
--------------------------------------------------------------------------------------------------------------------------
system    1000003.SYS  177      23512  3      58587  0        0         localDisk    0000-00-00T00:00:00+00:00  false    
debug     1000003.DBG  338      36667  3      70576  0        0         localDisk    0000-00-00T00:00:00+00:00  false    
trace     1000003.TRC  0        128    3      478    0        0         localDisk    0000-00-00T00:00:00+00:00  false    
acct      1000003.ACT  1        206    3      634    0        0         localDisk    0000-00-00T00:00:00+00:00  false    
security  1000003.SEC  2        323    3      1275   0        0         localDisk    0000-00-00T00:00:00+00:00  false    
audit     1000003.AUD  36       6482   3      12294  0        0         localDisk    0000-00-00T00:00:00+00:00  false    
packet    1000003.PKT  0        128    3      176    0        0         localDisk    0000-00-00T00:00:00+00:00  false    


To view local authorization configuration details:

user admin {
    group                Administrator;
    passwordAgingState   enabled;
    accountAgingState    disabled;
    passwordLoginSupport enabled;
    interactiveAccess    enabled;
    m2mAccess            disabled;
}
userStatus admin {
    currentStatus Enabled;
    userId        3000;
}


To view SNMP community string:

admin@sbx1> show table oam snmp communityString
SNMP       SNMP
COMMUNITY  COMMUNITY
INDEX      NAME
----------------------
admin      admin
guest      guest
operator   operator


To view the OAM statistic, LDAP server status details:

show table oam ldapAuthentication ldapStatus

SERVER                  AVAILABLE
NAME         STATUS     AT
---------------------------------
ldapServer1  available  n/a


To view OAM users Auth and Priv key information:

admin@sbx1> show table oam snmp users
                    AUTH                               PRIV
USERNAME  GROUP     PROTOCOL  AUTH KEY                 PROTOCOL  PRIV KEY
------------------------------------------------------------------------------------------
admin     admin     hmacsha   00:00:00:00:00:00:00:00  aes128    00:00:00:00:00:00:00:00
guest     guest     hmacsha   00:00:00:00:00:00:00:00  aes128    00:00:00:00:00:00:00:00
operator  operator  hmacsha   00:00:00:00:00:00:00:00  aes128    00:00:00:00:00:00:00:00


To view RADIUS authentication details:

Statistics Examples
> show status oam radiusAuthentication radiusServer 
radiusServer s1;

> show status oam radiusAuthentication radiusStatus
radiusStatus s1 {
status available;
availableAt n/a; 

> show table oam radiusAuthentication radiusServer 
                            RADIUS         RADIUS  RADIUS    RADIUS   MGMT 
SERVER                      SERVER         SERVER  NAS IP    SHARED   INTERFACE 
NAME    PRIORITY  STATE     IP             PORT              SECRET   GROUP 
--------------------------------------------------------------------------------
s1      1         enabled   10.54.90.107   1812    0.0.0.0   -        -

> show table oam radiusAuthentication radiusStatus 
SERVER 
NAME                         AVAILABLE 
ID         STATUS            AT 
----------------------------------------
s1         available         n/a

> show table oam radiusAuthentication retryCriteria
retryTimer 2000;
retryCount 2;
oosDuration 120;


To view CDR Server admin details:

> show table oam accounting cdrServer admin
                                  USE
                                  SSH
                IP          CDR   KEY                                         FILE    CONNECTION  TRANSFER
TYPE            ADDRESS     PORT  FILE  USERNAME  PASSWORD          PATH      PREFIX  TIMEOUT     TIMEOUT
---------------------------------------------------------------------------------------------------------
primary         10.10.10.10  22   enable admin    $3$6ukQCu3ULEw=   "testPath "cdr    15          15


To view Platform Audit Logs configuration details:

admin@WFDSBC01b> show table oam eventLog platformAuditLogs
	state enabled;


To view platformRsyslogConfig details:

admin@SBXUK11-1> show configuration details oam eventLog platformRsyslog

syslogState disabled;

linuxLogs {

    platformAuditLog disabled;

    consoleLog       disabled;

    sftpLog          disabled;

    kernLog          disabled;

    userLog          disabled;

    daemonLog        disabled;

    authLog          disabled;

    syslogLog        disabled;

    ntpLog           disabled;

    cronLog          disabled;

    fipsLog          disabled;

}

servers server1 {

    remoteHost   0.0.0.0;

    protocolType tcp;

    port         515;

}

[ok][2018-08-13 11:10:39]


Error Messages

When NP 0 error counter messages are received in the DBG logs, the Ethernet Switch configuration (Datalink Device L2) is checked. If the Switch is overloaded with traffic,

  • The total drop count on the particular Interface on the Switch must be checked.
  • The Switch side configuration must be corrected.

Every Switch vendor has their own command to display the drop counts. Therefore, the respective document must be checked to check the drop counts.