Modified: for 9.2.3
The SBC Core's SIP trunk group signaling configuration is enhanced to include a parameter, Use the parameter, generateOrReplacePCV
, to relay or generate a P-Charging-Vector (PCV) header, depending upon the terminating and originating Inter-Operator Identifier (IOI) values sent in the PCV header.generateOrReplacePCV
, to specify the term-IOI and orig-IOI identifiers, as well as enable/disable the option to relay or generate a PCV header using the configured values. By default, this feature is disabled. generateOrReplacePCV
flag is enabled, the SBC either replaces the term-IOI and orig-IOI values in a PCV header (if present) with the provisioned values, or generates the missing PCV header term-IOI and orig-IOI from the incoming message with the provisioned values. sendPCVHeader
flag is enabled on an SBC trunk, the SBC sends the PCV header in the outgoing message. If the flag is disabled, the SBC does not add the PCV header to the outgoing message.
On the SBC main screen, go to All > Address Context > Zone > SIP Trunk Group > Signaling > Generate Or Replace PCV or
Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Signaling > Generate Or Replace PCV
The Message manipulation window opens. Using the drop-down lists, select the Address Context, Zone, and SIP Trunk Group that you want to configure.
Use the following table to configure the values, and then click Save.
SIP Trunk Group - Generate Or Replace PCV parameters:
Parameter | Length/Range | Description |
---|---|---|
Generate Or Replace PCV | N/A | Use this configuration to relay or generate a P-Charging-Vector (PCV) header, depending upon the terminating and originating Inter-IOI values sent in the PCV header. |
State | N/A | Enable this flag to allow the SBC to either replace the term-IOI and orig-IOI values in a PCV header (if present) with the provisioned values, or generate the missing PCV header term-IOI and orig-IOI from the incoming message with the provisioned values.
|
Orig IOI | 1-63 characters, or null | Specify the originating inter-operator ID (default = null). |
Term IOI | 1-63 characters, or null | Specify the terminating inter-operator ID (default = null). |
Send PCVHeader | N/A | Enable this flag to send the PCV header in the outgoing message. If disabled, the SBC does not add the PCV header to the outgoing message.
|