In this section:
This section describes the SIP Registration commands to accomplish the following activities:
Use this command to reset the SIP registration count.
> request addressContext <addressContext name> sipRegCountReset
The following example resets SIP registration count for address context “default”:
request addressContext default sipRegCountReset result success reason Registration Count is Reset
Use this command to provide flexibility in disabling/resetting adaptive NAT pinhole learning process for a specific user already registered with the SBC.
> request addressContext <addressContext name> sipRegistrationAdaptiveNatLearning action <disable | reset> id <registration id number>
The following example disables the NAT pinhole learning process for registered user with an ID of 13:
request addressContext default sipRegistrationAdaptiveNatLearning id 13 action disable
Use this object to delete a SIP registration by the user’s ID number.
> request addressContext <addressContext name> sipRegistrationDeleteById id <registration id>
The surrogate registration is not deleted by the following command.
request addressContext default sipRegistrationDeleteById id 13 result success
Use this object to delete a SIP registration by the IP address using the Registrar’s IP address (found in sipActiveGroupRegStatus
table).
> request addressContext <addressContext name> sipRegistrationDeleteByIp ipAddress <ip address>
The surrogate registration is not deleted by the following command.
request addressContext default sipRegistrationDeleteByIp ipAddress 10.20.128.13 result success