This section specifies the Sustained Call Rate Utilization signaling quality measurement.

To View and Edit QOE - Scru

On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > SIP Trunk Advanced > QOE > Scru. The Scru window is displayed.

The QOE - Scru can be checked for each Address Context, for each Zone, for each SIP Trunk Group created or for all the Address Contexts, Zones and SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and SIP Trunk Group.

The Edit Scru window is displayed.

SIP Trunk Advanced - QOE - Scru Edit Window

 

The following fields are displayed:

SIP Trunk Advanced - QOE - Scru Parameters

Parameter

Description

Critical Qos Scru LimitSpecifies the critical Sustained Call Rate Utilization (SCRU) limit, below which the call admission should be stopped. The value range from 80 - 100, with a default value of 80.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

  • No labels