This section specifies the parameters and controls used for routing a call or request to the next-hop entity.

To View and Edit Call Routing

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > Policy > Call Routing. The Call Routing window is displayed.

The Call Routing can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.

The Edit Call Routing window is displayed.

H323 Trunk Group - Policy - Call Routing Edit Window

 

The following fields are displayed:

H323 Trunk Group - Policy - Call Routing Parameters


Parameter


Description

Element Routing PriorityThe Element Routing Priority table indicates what Call Processing Elements types (including "none") should be used to determine matching routing table entries. Routing table lookups are attempted in priority order for all matching Call Processing Element types until a match is found. Different Element Routing Priority profiles can be associated with different (ingress) trunk groups. If no Element Routing Priority table is explicitly associated with a trunk group, the DEFAULT_IP Element Routing Priority profile is used.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels