In this section:
Use the Cns Group Profile window to specify a group of up to 8 servers to receive call notifications and to specify how the SBC should distribute the notifications among the servers. When you create a profile you add information on the first server in the Cns Group Data section. You can add up to 7 more Cns group data objects (for a total of 8) to a profile using the Cns Group Data window. Cns group profiles and Cns group data objects are used with the SBC's call notification feature. Refer to Sending Unsolicited Call Notifications to Application Servers for more information on call notification.
On the SBC main screen, go to All > Global > Servers > Cns Group > Cns Group Profile
The Cns Group Profile window opens.
Cns Group Profile Window
To create a Cns group profile:
Click New Cns Group Profile. The Create New Cns Group Profile window opens.
Create New Cns Group Profile Window
Use the following table to configure the options and then click Save. After you create the profile, you can add more Cns group data objects to the profile using the Cns Group Profile - Cns Group Data window.
Cns Group Profile Parameters
Parameter | Description |
---|---|
Name | Specifies a name of up to 23 characters for the Cns group profile. |
Description | Specifies an optional description of up to 199 characters for the profile. |
Load Distribution | Specifies how to distribute call notifications among the servers in this group. The options are:
|
URI | Specifies a URI of up to 140 characters to use in the Request-URI of NOTIFY messages for this group of servers. |
Cns Group Data | |
Sequence | Specifies a sequence number for a server within the group. If the Load Distribution type is Sequence, the SBC attempts to send call notifications to the servers in their specified sequence. The range allowed is 0 - 7. |
Transport | Specifies the transport type to use for sending notifications to this server. Currently the only type is UDP. |
Remote Address | Specifies an IP address or FQDN of up to 63 characters for the server to receive call notifications. |
Remote Port | Specifies the number of a port to send call notifications on the server. The default is 5060. |
Call Notify TGID | Specifies the name of a trunk group through which the SBC sends call notifications. |
Select the Cns group profile by clicking the radio button adjacent to it. The Edit Selected Cns Group Profile window opens.
You can only make changes to the general profile parameters in this window.
Select the Cns group profile by clicking the radio button adjacent to it.
Click Copy Cns Group Profile. The Copy Selected Cns Group Profile window opens.
Select the Cns group profile by clicking the radio button adjacent to it.
Confirm the deletion when prompted.