In this section:
This object creates and configures a call admission control (CAC) profile providing the ability for each SIP registered or static endpoint to have individualized limits on the number of active calls and the call rate.
A limit on active calls (CALL LIMIT) is applied to calls in either the ingress or egress direction, whereas policing controls (RATE, BURST-SIZE) apply to ingress and egress calls separately.
On the SBC main screen, go to Configuration > System Provisioning > Category: CAC Provisioning > Sip Cac Profile. The SIP CAC Profile window is displayed.
CAC Provisioning - Sip Cac Profile
To edit any of the SIP CAC Profiles in the list, click the radio button next to the specific SIP CAC Profile name.
CAC Provisioning - Sip Cac Profile Highlighted
The Edit Selected SIP CAC Profile window is displayed below.
CAC Provisioning - Sip Cac Profile \Edit window
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To create a new SIP CAC Profile, click New SIP CAC Profile tab on the SIP CAC Profile List panel.
CAC Provisioning - Sip Cac Profile Fields
The Create New SIP CAC Profile window is displayed.
CAC Provisioning - Sip Cac Profile Create Window
The following fields are displayed:
SIP CAC Profile Parameters
Parameter | Description |
---|---|
| Specifies the name of the SIP Call Admission Control (CAC) profile you are configuring. Must be 1-23 characters. |
| Specifies the administrative state of this SIP CAC Profile:
NOTE: Setting a SIP CAC profile state to " |
| Specifies the call limit utilization notification threshold limit. The value range from 0 to 100. |
| Specifies the maximum call arrival rate from a peer or registered endpoint per RATE- PERIOD. Must be 0-500 (calls) or unlimited; default is 0. A value of 0 indicates that call rate policing is not applicable. |
| Specifies the period in seconds over which the CALL INGRESS RATE applies. Must be 1-10 seconds; default is 1. |
| Specifies the maximum call burst size from a peer or registered endpoint. Must be 1- 500; default is 1. |
| Specifies whether to enable call emergency preference in the Ingress mode or not. The default value is |
| Specifies the preference of calls within the aggregate policer in the Ingress mode. |
| Specifies the emergency preferences of calls within the aggregate policer in the Ingress mode. |
| Specifies the maximum call rate to a registered endpoint or peer per RATE-PERIOD. Must be 0-500 (calls) or unlimited; default is 0. A value of 0 indicates that call rate policing is not applicable. |
| Specifies the period in seconds over which the CALL EGRESS RATE applies. Must be 1-10 seconds; default is 1. |
| Specifies the maximum call burst size for calls to a registered endpoint or peer. Must be 1-500 (calls); default is 1. |
| Specifies whether to enable call emergency preference in the Egress mode or not. The default value is |
| Specifies the preference of calls within the aggregate policer in the Egress mode. |
| Specifies the emergency preferences of calls within the aggregate policer in the Egress mode. |
| Specifies the maximum number of active calls to and from any registered endpoint or peer (the total number of ingress and egress calls). Default is |
| Specifies the maximum bandwidth a peer can use in kbps. The value range from 0 to 2147483647 k bits/second or |
| Specifies the bandwidth limit value in percentage. The value range from 0 to 100. |
Bandwidth Video Threshold | Specifies the threshold value (as a percentage of video bandwidth) to limit video streams to a specific bandwidth to prevent video calls consuming call bandwidth otherwise needed for audio calls. The value range from 0 to 100 and the default value is "0" which indicates no video threshold value. |
| Oversubscription of calls (as a percentage) allowed for emergency calls. Enter value in range of 0-1000. Oversubscription of calls (as a percentage) allowed for emergency calls. When the baseline limit is reached, normal calls will be stopped but emergency calls will be allowed up to this additional percentage. |
Extended Emergency Ip Limit | Additional number of emergency calls (expressed as a numeric value) allowed if call limit and emergency oversubscription quota are exhausted. The value ranges from 0 to 40000 and the default value is 0. |
| Specifies the maximum number of inbound active calls. The value range from 0 to 30000 or |
| Specifies the oversubscription of calls (as percentage) allowed for inbound emergency calls. Once the baseline limit is reached, normal calls are blocked but emergency calls are allowed. The value range from 0 to 1000. |
Extended Emergency Ip Limit Ingress | Additional number of emergency calls (expressed as a numeric value) allowed for ingress CAC group if call limit and emergency oversubscription quota are exhausted. The value ranges from 0 to 40000 and the default value is 0. |
| Specifies the maximum number of outbound active calls. The value range from 0 to 30000 or |
| Specifies the oversubscription of calls (as percentage) allowed for emergency calls. The value range from 0 to 1000. |
Extended Emergency Ip Limit Egress | Additional number of emergency calls (expressed as a numeric value) allowed for egress CAC group if call limit and emergency oversubscription quota are exhausted. The value ranges from 0 to 40000 and the default value is 0. |
To copy any of the created SIP CAC Profile and to make any minor changes, click the radio button next to the specific SIP CAC Profile to highlight the row.
CAC Provisioning - Sip Cac Profile Highlighted
Click Copy SIP CAC Profile tab on the SIP CAC Profile List panel.
CAC Provisioning - Sip Cac Profile Fields
The Copy Selected SIP CAC Profile window is displayed along with the field details which can be edited.
CAC Provisioning - Sip Cac Profile Copy Window
Make the required changes to the required fields and click Save to save the changes. The copied SIP CAC Profile is displayed at the bottom of the original SIP CAC Profile in the SIP CAC Profile List panel.
To delete a SIP CAC Profile, click the radio button next to the specific SIP CAC Profile which you want to delete.
CAC Provisioning - Sip Cac Profile Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
CAC Provisioning - Sip Cac Profile Delete Confirmation
Click Yes to remove the specific SIP CAC Profile from the list.