The SBC uses the Test Call Number Profile to verify PSX test data access. The SBC uses this profile to determine whether to send a PSX query to a test PSX or to the production PSX. When the SBC receives a call from one of the configured numbers in the Test Call Number Profile, the SBC sends the PSX query to the test PSX, if available.
When the SBC receives a call from a number not included in the Test Call Number Profile, the SBC sends the PSX query to the production PSX.
The Test Call Number Profile CLI syntax is provided below.
% set profiles services testCallNumberProfile <name of profile> testCallNumber <test number>
Use the following CLI syntax to associated a testCallNumberProfile
with a trunk group:
% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <SIP TG name> services testCallNumberProfile <testCallNumberProfile name>
Parameter | Length/Description | Description |
---|---|---|
testCallNumberProfile | 1-23 characters |
|
testCallNumber | 1-24 digits |
NOTE: The SBC supports up to 16 test call numbers per Test Call Number Profile. The process to identify a test call number is accomplished by using exact match.
|