In this section:

Command Syntax

> show status alarms
	currentStatus <alarm Id> 
		clearType
        desc
        reporter
        severity
        timestamp
    historyStatus <alarm Id>
        desc
        reporter
        severity
        state
        timestamp

Command Parameters

Parameter

Description

currentStatus

Displays status of current outstanding alarms.

  • <alarm Id> – Alarm identifier.
  • clearType – Type of clear: AUTOMATIC or MANUAL.
  • desc – Alarm description.
  • reporter – Name of the task reporting this Alarm.
  • severity – Alarm severity.
  • timestamp – Time when the alarm was raised.
historyStatus

Displays history of alarms depending upon options selected.

  • <alarm Id> – Alarm identifier.
  • desc – Alarm description.
  • reporter – Name of task reporting alarm.
  • severity – Alarm severity.
  • state – Alarm state (SET, CLEAR OR MAN CLR).
  • timestamp – Timestamp when the alarm was raised.

Command Example

admin@BONGOB> show status alarms historyStatus state SET
historyStatus 10601 {
    timestamp 2013-06-18T09:50:49;
    state     SET;
    desc      "System Policer Alarm Level: Major, Policer Type Discard Rule, Previous Level No Alarm.";
    reporter  IPM;
    severity  Major;
}
historyStatus 10603 {
    timestamp 2013-06-18T09:55:49;
    state     SET;
    desc      "System Policer Alarm Level: Major, Policer Type Discard Rule, Previous Level No Alarm.";
    reporter  IPM;
    severity  Major;
}
historyStatus 10605 {
    timestamp 2013-06-18T10:00:49;
    state     SET;
    desc      "System Policer Alarm Level: Major, Policer Type Discard Rule, Previous Level No Alarm.";
    reporter  IPM;
    severity  Major;
}
historyStatus 10607 {
    timestamp 2013-06-18T10:10:50;
    state     SET;
    desc      "System Policer Alarm Level: Major, Policer Type Discard Rule, Previous Level No Alarm.";
    reporter  IPM;
    severity  Major;
}

  • No labels