In this Section:
The SBC Core uses the OAM Event Log memusage command to log the memory usage of each process over a configurable interval. The SBC generates a memory log which is uses to capture and log process heap memory usage over time. The following limitations apply in this release: The number of bytes used by an active process are captured in the memory usage log file: Processes are identified by the log entries encoded by the system. For example, the format of a log entry: The memory usage details are logged to the hard drive in the directory: Use the log number to locate the correct log file. For example: where the 113 03282017 073341.007995:1.01.00.00006.MAJOR .PRS: memusage: 1516445696
/var/log/sonus/sbx/evlog
/var/log/sonus/sbx/evlog/<log number>.mem
<log number>.mem
is the memory usage log file.
On the SBC main screen, navigate to All > OAM > Event Log > Memusage.
The Memusage window is displayed.
Memusage window
The parameters displayed in the window, and their descriptions, are given below:
Memusage - Parameter Description Table
Parameters | Description |
---|---|
State | Enable this flag to measure the memory usage of each active process.
|
Mode | Specifies the level of details to be displayed.
|
Interval | The time interval, in minutes, to elapse between the recording of each memory usage file to the hard drive. (Default = 5) Note: An interval of 1440 minutes (24 hours) equates to one log entry per day for a process. |
To edit the Memusage:
Enabled
for the flag State
. The default State
is Disabled
.Mode
from the dropdown list. The default Mode
is Summary
.Interval
. The default value is 5 minutes.