In this section:
This section defines the CLI syntax and parameters used to configure enhanced 911 service, including the E911 VoIP Positioning Center (VPC) device.
% set global servers e911 <e911_service_name> criteria triggerCriteria <criteria> defaultTreatment <applyFinalTreatment | routeAsDialed> flags active <disable | enable> requestTimeOut <0-2147483647> routePrecedence <local | lro>
E911 Parameters
Parameter | Length/Range | Description |
---|---|---|
| N/A | The E911 service name. |
criteria triggerCriteria <criteria> | 0-23 | The criteria (refer to Number Translation Criteria - CLI) to trigger the service. |
defaultTreatment | N/A | Default treatment to apply for requests that time out.
|
flags active | N/A | Administrative state of the service.
|
requestTimeOut | 0-2147483647 | The request timeout value, in milliseconds, for messages. (default = 4000) |
| N/A | Routing treatment to apply in the event that a location for the caller cannot be determined, either “Local” or “Last Routing Option” (LRO).
|
% set global servers e911VpcDevice <device_name> deviceData <0-32767> ipAddress <ip_address> portNumber <0-65535>
E911 VPC Device Parameters
Parameter | Description |
---|---|
| Use this object to configure the IP address and port number of the E911 VoIP Positioning Center (VPC) device. This parameter is used for queries to one or more E911 VPCs for the Emergency Services Routing Number of the Public Services Answering Point nearest the current location of the caller.
|