In this section:
This page includes SBC 5400 performance metrics.
Provisioning Capacities
SBC 5400 Performance and Capacity
| Specification | Category | SBC 5400 Platform |
|---|---|---|
SIP/GW Call Set-up | Call set-up rate | 700 cps |
| Call latency | 30ms @ 700cps | |
| Sessions by Signaling Protocols* | SIP | 75,000 |
| Sessions by Codec* | G.729 (20 ms) | 75,000 |
| G.711 (20 ms) | 75,000 | |
| RTCP Sessions Scale | 1:1 with RTP sessions | |
| Registrations | Initial register rate with no calls, in registers per second (Includes initial Register Authentication) | 1250 |
| Security | TLS connections set-up rate (without mutual authentication) | 750 |
| Maximum number of IPSec tunnels | 2,048 (4,096 IPSec SAs) | |
| IPSEC (IKE) setup rate | 150 | |
| Maximum number of SRTP sessions | 75,000 | |
| Maximum number of registered subscribers on IMS AKA | 256,000 | |
| Subscribers | Over UDP with an interval refresh REGISTER of 1800 sec. | 600,000 |
| Over UDP/NAT with an interval refresh REGISTER of 30 sec. | 225,000 | |
| Over UDP/NAT with an interval refresh REGISTER of 60 sec. | 300,000 | |
| Over TCP with an interval refresh REGISTER of 300 sec. | 425,000 | |
| Over TLS with an interval refresh REGISTER of 300 sec. | 375,000 |
* The session count represents the aggregate number of sessions on one system.
Pass-Through With/Without sRTP
Pass-Through with sRTP
Codec | Packet Size | ||
|---|---|---|---|
10 ms | 20 ms | 40 ms | |
G.711 | 28,000 | 50,000 | 75,000 |
G.729 | 32,000 | 64,000 | 75,000 |
Pass-Through Without sRTP
Codec | Packet Size | |||
|---|---|---|---|---|
| 10 ms | 20 ms | 30 ms | 40 ms |
G.711 | 50,000 | 75,000 | 75,000 | 75,000 |
G.726 | 50,000 | 75,000 | 75,000 | 75,000 |
G.729 | 50,000 | 75,000 | 75,000 | 75,000 |
G.722 | 50,000 | 75,000 | 75,000 | 75,000 |
AMR (12.2k) -BWE | N/A | 75,000 | N/A | 75,000 |
AMR (12.2k) -OA | N/A | 75,000 | N/A | 75,000 |
eVRC | N/A | 75,000 | N/A | 75,000 |
eVRC-B | N/A | 75,000 | N/A | 75,000 |
G.722.1 | N/A | 75,000 | N/A | 75,000 |
AMR-WB - BWE | N/A | 75,000 | N/A | 75,000 |
AMR-WB-OA | N/A | 75,000 | N/A | 75,000 |
iLBC - 20 ms | N/A | 75,000 | N/A | 75,000 |
iLBC - 30 ms | N/A | N/A | 75,000 | N/A |
G.723.1 | N/A | N/A | 75,000 | N/A |
H.323 Performance Metrics
SBC 5400 H.323 Performance Metrics
Specification | Category | Limit |
|---|---|---|
| H.323 Call setup | Call setup rate | 250 cps |
| Call latency | 50 ms @ 250 cps | |
| Fast start or tunneled H.245 calls | SIP-H.323 or GW-H.323 | 30,000 |
| H.323-H.323 | 15,000 | |
| Separate H.245 calls (50 ms @ 200 CPS) | SIP-H.323 or GW-H.323 | 4,000 |
Maximum Initial (challenged) REGISTER Rate with Background Load
Maximum Initial (challenged) REGISTER Rate with Background Load (SIP calls/second)
Initial SIP | Number of | Interval of Refresh | SIP Calls/Sec | |
|---|---|---|---|---|
UDP | 800 | 225,000 | 30 | 200 |
1,500 | 300,000 | 60 | 300 | |
TCP | 1,000 | 425,000 | 300 | 300 |
| TLS | 750 | 375,000 | 300 | 300 |
SIP Session and Registration Capacity Limits
SIP Session and Registration Capacity Limits
| Sessions | SIP Calls/Sec | Call Hold (seconds) | Refresh REGISTER Interval (seconds) | Subscribers | |
Non-TLS Peering | 75,000 | 700 | 107 | ||
TLS Peering | 74,400 | 600 | 124 | ||
UDP | 72,000 | 400 | 180 | 30 | 225,000 |
72,000 | 500 | 144 | 60 | 300,000 | |
TCP | 54,000 | 500 | 108 | 300 | 425,000 |
Note
In the current implementation, the “send” and “receive” buffer size for TCP packets is restricted to 64 kilobytes. Due to this limitation, the SBC cannot handle traffic where the product of the TCP packet size (measured in kilobytes) and the processor rate (measured in cycles per second) exceeds 64. For example, if the packet size is 3 kilobytes and the processor rate is 25 cycles per second, the product is 75 - which is greater than the TCP buffer size. If the TCP buffer overflows, the SBC resets the connection. This is particularly important when the packet sizes are large, as in case of packets containing the INFO header that bloats the packet sizes.
Video Calls Metrics
Video Calls Metrics
Specification | Limit |
|---|---|
SIP-SIP conference sessions (media anchored) consisting of five streams: audio, main video, content share video, far end camera control (FECC), and floor control (BFCP) | 20,000 |
| SIP-SIP conference sessions with direct media | 20,000 |
| SIP-SIP conference sessions | 500 cps |
| H.323-H.323 video sessions (media anchored) comprising up to two media streams (one audio, one video) | 4,000 |
| H.323-H.323 video sessions | 40 cps |
SUBSCRIBE/NOTIFY Benchmark for SBC 5400 (with ERE)
SUBSCRIBE/NOTIFY benchmarking metrics for SBC 5400 are provided below.
SUBSCRIBE/NOTIFY Benchmark for SBC 5400 (with ERE)
Scenario | SUBSCRIBE | REGISTER | Calls | SUBSCRIBE /Sec | REGISTRATION/sec | CALLS/Sec |
SUBSCRIBE From Unregistered user | 1,500,000 | 300 | ||||
SUBSCRIBE with 50,000 Calls | 500,000 | 50,000 | 300 | 600 | ||
SUBSCRIBE with 40,000 calls and 128,000 Registrations (Calls from Registered user) | 400,000 | 128,000 | 40,000 | 300 | 600 | 600 |
SUBSCRIBE with 256,000 Registrations (subscribe from registered user) | 1,000,000 | 256,000 | 300 | 600 |
Dynamic Capacities
The SBC 5400 can support up to 75,000 simultaneous calls.
- Combination of RTP and RTCP calls.
- SRTCP and SRTP with 40 ms or larger packets.
The SBC 5400 can be subject to bandwidth limitations that prevent the total call count from reaching 75,000.
Sessions
The following table lists the SBC 5400 session limits:
Sessions
Functionality | SBC 5400 |
|---|---|
| Call recording sessions (NICE/SIPREC) | 32,000 |
| Lawful Intercept Sessions | 2048 |
| Media capture tool (MCT) sessions | 10 |
NP-based DTMF detection (simultaneous digits) | 1,024 |
| NP-based DTMF insertion (simultaneous digits) | 1,024 |
Overview
Content Tools