In this section:

Related articles:


This object specifies the name of the Internet Key Exchange (IKE) peer database entry. This name identifies an entry in the IKE Peer Database (IPD). The IPD is a list of remote devices that may become IPSec peers. The IPD establishes the authentication and other phase 1 criteria for the peer-to-peer negotiation to eventually reach an IKE Security Association (SA) between this specific peer and the SBC.

To View Peer

On the SBC main screen, navigate to All > Address Context > Ipsec > Peer.

The Peer can be checked for each Address Context or for all the Address Contexts created. Use the drop-down box to select the desired Address Contexts.

All - Address Context - Ipsec - Peer Main Field


The Peer window is displayed.

All - Address Context - Ipsec - Peer


 

To Edit Peer

To edit any of the Peer in the list, click the radio button next to the specific Peer name.

All - Address Context - Ipsec - Peer Highlighted


The Edit Selected Peer window is displayed below.

All - Address Context - Ipsec - Peer Edit Window


Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Peer

To create a new Peer, click New Peer tab on the Peer List panel.

All - Address Context - Ipsec - Peer Fields


The Create New Peer window is displayed.

All - Address Context - Ipsec - Peer Create Window


The following fields are displayed:

Peer Parameters


Parameter

Description

Name

Specifies the name of the peer you are configuring.

IP Address

Specifies the 32-bit IP address of the Peer.

Protocol

The SPD traffic selector IP PROTOCOL. Valid values for this parameter are:

  • ikev1: Indicates the version of IKE protocol. Internet Key Exchange Version 1.
  • ikev2: Indicates the enhanced version of IKE protocol. Internet Key Exchange Version 2.
  • any: Indicates either IKEv1 is used or IKEv2 version is used.

Pre Shared Key

Specifies the Pre-shared secret key with this peer.

The SBC accepts the pre-shared key in the following formats:

  • An ASCII string of 32 to 128 case-sensitive alphanumeric characters from the range of 0-9, a-z, space, and A-Z. Example: 1234567890abcdef1234567890ABCDEF.
  • A HEX encoding of an ASCII string of 16-64 case-sensitive alphanumeric characters from the range of 0-9, a-z, space, and A-Z converted into hexadecimal format starting with "0x". Example: 1234567890aBcDeF converted to a hexadecimal format 0x31323334353637383930614263446546.

In either case the given value represents a "pre-shared secret" between the SBC and the IKE peer. This value is used for mutual authentication for phase 1 negotiation to set up an IKE Security association.

Ribbon strongly recommends using unpredictable (difficult to guess) values. Use a unique value for each IKE peer. This string is never displayed in plaintext when using the show commands.

Protection
Profile

The name of the ike protection profile to be applied to the Key management protocol exchange with this peer.

Local IdentityThis object specifies the local identity type that the SBC asserts to the peer during phase 1 authentication.

The ipVxAddr attribute is not used at this time. If it is present, ignore it.

To Copy Peer

To copy any of the created Peer and to make any minor changes, click the radio button next to the specific Peer to highlight the row.

All - Address Context - Ipsec - Peer Highlighted



 

Click Copy Peer tab on the Peer List panel.

All - Address Context - Ipsec - Peer Fields


 

The Copy Selected Peer window is displayed along with the field details which can be edited.

All - Address Context - Ipsec - Peer Copy Window


 

The ipVxAddr attribute is not used at this time. If it is present, ignore it.

Make the required changes to the required fields and click Save to save the changes. The copied Peer is displayed at the bottom of the original Peer in the Peer List panel.

To Delete Peer

To delete any of the created Peer, click the radio button next to the specific Peer which you want to delete.

All - Address Context - Ipsec - Peer Highlighted


 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

All - Address Context - Ipsec - Peer Delete Confirmation


Click Yes to remove the specific Peer from the list.