In this section:


The Signaling Qos KPI Profile is associated with an IP Signaling Profile which in turn can be associated to an IP Peer or Ip Signaling Peer Group Data or trunk group as a part of IP Signaling Profile.

To View Ip Signaling Peer Group Data

On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Ip Signaling Peer Group > Ip Signaling Peer Group Data.

Select the specific Ip Signaling Peer Group from drop-down box on the Ip Signaling Peer Group Data panel.

Call Routing - Profiles - Ip Signaling Peer Group Main Field

The Ip Signaling Peer Group Data window is displayed.

Call Routing - Profiles - Ip Signaling Peer Group Data

To Edit Ip Signaling Peer Group Data

To edit any of the Ip Signaling Peer Group Data in the list, click the radio button next to the specific Ip Signaling Peer Group Data name.

Call Routing - Ip Signaling Peer Group Data Highlighted

The Edit Selected Ip Signaling Peer Group Data window is displayed below.

Call Routing - Profiles - Ip Signaling Peer Group Data Edit

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Ip Signaling Peer Group Data

To create a new Ip Signaling Peer Group Data, click New Ip Signaling Peer Group Data tab on the Ip Signaling Peer Group Data List panel.

Call Routing - Profiles - Ip Signaling Peer Group Data Fields

The Create New Ip Signaling Peer Group Data window is displayed.

Call Routing - Profiles - Ip Signaling Peer Group Data Create Window

The following fields are displayed:

IP Signaling Peer Group Data Parameters

Parameter

Description

Sequence

Specifies the sequence of this Ip Signaling Peer Group Data.

Service Status

Specifies the type of service for this Ip Signaling Peer Group Data. Select inService to use this IP peer.

The options are:

  • inService
  • outOfService

Ip Address

Specifies the IP Address of this Ip Signaling Peer Group Data.

Ip Port

Specifies the TCP/UDP port value of this Ip Signaling Peer Group Data.

Fqdn

Specifies the FQDN value to use for sending egress calls/requests to the IP peer.

Fqdn Port

Specifies the FQDN port number to be used for sending egress calls/requests to the  IP peer.

To Copy Ip Signaling Peer Group Data

To copy any of the created Ip Signaling Peer Group Data and to make any minor changes, click the radio button next to the specific Ip Signaling Peer Group Data to highlight the row.

Call Routing - Ip Signaling Peer Group Data Highlighted

Click Copy Ip Signaling Peer Group Data tab on the Ip Signaling Peer Group Data List panel.

Call Routing - Profiles - Ip Signaling Peer Group Data Fields

The Copy Selected Ip Signaling Peer Group Data window is displayed along with the field details which can be edited.

Call Routing - Profiles - Ip Signaling Peer Group Data Copy Window


 

Make the required changes to the required fields and click Save to save the changes. The copied Ip Signaling Peer Group Data is displayed at the bottom of the original Ip Signaling Peer Group Data in the Ip Signaling Peer Group Data List panel.

To Delete Ip Signaling Peer Group Data

To delete any of the created Ip Signaling Peer Group Data, click the radio button next to the specific Ip Signaling Peer Group Data which you want to delete.

Call Routing - Ip Signaling Peer Group Data Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Call Routing - Ip Signaling Peer Group Delete Data Confirmation

 

Click Yes to remove the specific Ip Signaling Peer Group Data from the list.

  • No labels