Additional section:

E911Vpc Device - Device Data

In this section:

This object specifies the VPC device name for E911 server. This parameter is used to define E911 VoIP Positioning Center device data for the SBC Core to use for queries to one or more E911Vpc Device. VPCs for the Emergency Services Routing Number of the Public Services Answering Point nearest the current location of the caller.

To View E911 Vpc Device

On SBC main screen, go to All > Global > E911 Vpc Device. The E911 Vpc Device List window is displayed.

Global - Servers - E911 Vpc Device

 

e

To Edit E911 Vpc Device

To edit any of the E911 Vpc Device in the list, click the radio button next to the specific E911 Vpc Device name.

Global - Servers - E911 Vpc Device Highlighted

 

The Edit Selected E911 Vpc Device window is displayed below.

Global - Servers - E911 Vpc Device Edit

 

The Object E911 Vpc Device cannot be edited as the fields are read only.

To Create E911 Vpc Device

To create a new E911 Vpc Device , click New E911Vpc Device tab on the E911 Vpc Device List panel.

Global - Servers - E911 Vpc Device Fields

 

The Create New E911 Vpc Device window is displayed.

Global - E911 Vpc Device Create

 

The following fields are displayed:

Global - Servers - E911 Vpc Device Create

 
Parameter Description
NameThe identifier for this VCP.
Device Data

Call Priority

Enter the call priority.

IP Address

Enter the IP address.

Both IPv4 and IPv6 addresses are supported.

Port Number

Enter the port number.

To Delete E911 Vpc Device

To delete any of the created E911 Vpc Device, click the radio button next to the specific E911 Vpc Device which you want to delete.

Global - Servers - E911 Vpc Device Highlighted

 


 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Global - Servers - E911 Vpc Device Delete Confirmation

 

Click Yes to remove the specific E911 Vpc Device from the list.

  • No labels