Use the Egress Flags window to configure controls that apply to the egress Trunk Group.
To View and Edit Egress Flags
On the SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > Signaling Profile > Egress > Egress Flags or
All > Profiles > Signaling > Signaling Profile > Egress > Egress Flags
Select the Signaling Profile to configure from the drop-down list. The Egress Flags window is displayed.
Signaling Profile - Egress - Egress Flags
Use the following table to configure the options and then click Save.
Signaling Profile - Egress - Egress Flags
| Parameter | Description |
|---|---|
| Add Prefix011For International Calls | When this option is enabled it allows the addition of the prefix 011 for international calls. |
| Add Prefix1For Inter Lata Calls | When this option is enabled it allows the addition of the prefix "1" for Inter LATA calls. |
| Add Prefix1For Intra Lata Calls | When this option is enabled it allows the addition of the prefix "1" for Intra LATA calls. |
| Annex ESupport | When this option is enabled Annex E is supported |
| Apply Switch Type Cpc Profile | When this option is enabled it enables the CPC/OLI Parameter Mapping feature on the associated Trunk Group(s). |
| Call Back When Free Support | When this option is enabled it enables the Call Back When Free feature on the associated Trunk Group(s). The PSX includes the Call Back When Free attribute in the route structure when the Trunk Group is included in the route list. |
| Called Number7Digits | When this option is enabled the 7-digit called number is sent as part of the outgoing signaling protocol. |
| Calling Number7Digits | When this option is enabled the 7-digit calling number is sent as part of the outgoing signaling protocol. |
| Change Bearer Cap From3_1KHz To Speech | When this option is enabled the bearer capability of 3.1 kHz received from the ingress is reset to speech for this outgoing Trunk Group. |
| Convert Numbers To E164Format | When this option is enabled, numbers are converted to E.164 format. |
| Cpc Mapping | When this option is enabled, it enables CPC mapping on the associated Trunk Group(s). |
| Dialed Number As Called Number | When this option is enabled, the PSX populates the called number (associated with a returned route) with the dialed number. |
| Disable Charging Authority For Chosen Carrier | When this option is enabled, the SBC does not delete the ISUP parameters from the ACM and CPG messages, and it allows the CHG message to transit when it is acting as the chosen carrier. |
| Discard Calling And Contract Numbers | When this option is enabled, the SBC will not include the calling and contractor numbers in egress signaling when the calling number NOA is Network Specific and the first digit of the calling number is not 0, or the calling number screening is set to User Provided, Verified, and Failed. |
| Discard GAPAddl Clg If Same As Clg Number And Ingress SIP | When this option is enabled, for SIP-to-ISUP calls, the SBC does not include the GAP additional calling number in the egress signaling if it is the same as the original calling number. |
| Discard Tns And Trunkgroup Owning Carrier Match | When this option is enabled it causes the TNS parameter to be discarded when it matches the Owning Carrier assigned to the egress trunk group. |
| Dont Strip Clg Number For Restricted Presentation | When this option is enabled the PSX does not strip (delete) the digits of the calling number for restricted presentation. |
| Forced Override Olip Value | When this option is enabled and there is a value other than none in the Forced OLIP Value field in the ingress section of the trunk group to which this signaling profile is applied, the value in that field is copied to the OLI parameter on the egress trunk and sent in the PSX policy response. |
| Generate Fe Param | When this option is enabled it specifies to generate the FE parameter. |
| Oli Mapping | When this option is enabled it enables OLI Parameter mapping on the associated trunk group(s). |
| Overwrite Charge Information If Chosen IXC | When this option is enabled, the SBC will modify parameters related to charge indication if the value of the Carrier Type parameter determined by the PSX is Chosen IXC. |
| Perform Called Party Member Check | When this option is enabled, the PSX checks the called party member status in the subscriber table for the JTI prefix. |
| Propagate Charge Message | When this option is enabled, the PSX propagates the CRG messages received on the associated egress trunk group from succeeding exchanges to the originating exchange for billing purposes. |
| Propagate Gd Param | This option controls the propagation of the Generic Digits parameter (switch ID/trunk group ID) in the forward direction in the egress IAM. |
| Propagate Ingress Channel Info | When this option is enabled, it propagates ingress PSTN channel information in the INVITE header sent by a GSX to this SIP Server (via the "chan" parameter in the From: field). |
| Reorder Trunk Based On ISUP Preference | When this option is enabled, the PSX orders route lists appropriately for calls over ISUP trunks that terminate to a protocol converter for R2 signaling. |
| Replace Prefix0With Plus81For Translation Source Number | When this option is enabled and the Translation Source Number has the prefix 0, PSX replaces the prefix 0 with +81. The SBC uses this number for SIP signaling. The Translation Source Number without the +81 is recorded in the CDRs. |
| Reroute On Signaling Congestion | When this option is enabled, calls on the associated trunk group are rerouted to an alternate route. |
| Reset Olip For Toll Free Calls | When this option is enabled, the GSX resets the OLIP for toll free calls to the pay phone code. |
| Restore Calling Number If Derived From Billing Number | When this option is enabled, the calling number that came in the policy request is sent in the policy response. |
| Restore Calling Number If Derived From Redirecting Number | When this option is enabled, the SBC does not delete the ISUP parameters from the ACM and CPG messages, and it allows the CHG message to transit when it is acting as the chosen carrier. |
| Restore Calling Number If Derived From Trunk Grp | When this option is enabled and if the PSX derives the calling number from the default calling number associated with the ingress Trunk Group during call processing, the original calling number is restored before the call is sent out on the egress Trunk Group. |
| Restore Fci International Bit | When this option is enabled, the PSX copies the incoming FCI A-bit to the outgoing FCI A-bit. |
| Send Billing Number As Clg Number | When this option is enabled, the PSX populates the contents of the billing number over to the calling party parameter. |
| Send Billing Number As Clg Number If Clg Number Not Present | When this option is enabled and if the calling number doesn't exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
| Send Calling Number When Not Derived From Input | When this option is enabled and if the calling number doesn't exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
| Send Contract Number If Allowed By Ingress SIP | When this option is enabled and the ingress signaling is SIP, the Contractor Number, if it exists, will be sent in the egress signaling. |
| Send Toll Free Number In Gap Param | When this option is enabled, the toll free number will be sent in the Generic Address Parameter (GAP). |
| Send Toll Free Number In Ocn Param | When this option is enabled, the toll free number will be sent in the Original Called Number (OCN) parameter. |
| Strip Rep Area Code Digits | When this option is enabled, RAC digits are removed from the called party number. |
| Transit All Redirection Number NOA | When this option is enabled, the PSX informs the SBC to forward the R-REL transparently to the previous switch regardless of the Nature Of Addresses. |
| Undo Lnp | When this option is enabled, the SBC undoes LNP on the associated Trunk Group(s). |
| Use Output ANIFor CDNIS | When this option is enabled, the Automatic Number Identification (ANI) to be included in the egress signaling will be used for the ANI provisioned in the Custom DNIS DM rule on the associated egress Trunk Group. |
Overview
Content Tools