The command syntax of the objects related to the show table alarms
command is shown below (see “show status alarms” for parameter details).
> show table alarms currentStatus <alarm Id> clearType desc reporter severity timestamp historyStatus <alarm Id> desc reporter severity state timestamp
admin@WFDSBC01a> show table alarms historyStatus ALARM ID TIMESTAMP STATE DESC --------------------------------------------------------- 1 2013-04-30T20:08:09 CLEAR Local server WFDSBC01a: NTP peer server IP address 10.128.254.67 is Inservice, waiting to synchronize 2 2013-04-30T20:08:16 SET High Availability port down: ceName = WFDSBC01a, portName = haPort1 3 2013-04-30T20:08:16 CLEAR High Availability port up: ceName = WFDSBC01a, portName = haPort2 4 2013-04-30T20:08:16 CLEAR Node: WFDSBC01 active after boot 5 2013-04-30T20:08:17 CLEAR High Availability port up: ceName = WFDSBC01a, portName = haPort1 6 2013-04-30T20:08:22 CLEAR Config and Policy databases are in sync on system: WFDSBC01, server: WFDSBC01a, role: active 7 2013-04-30T20:08:23 CLEAR Policy server communication to LWRESD is UP. 8 2013-04-30T20:08:26 CLEAR Packet port pkt0 on CE WFDSBC01a slot 0 with ifIndex 9 is UP 9 2013-04-30T20:08:27 CLEAR Packet port pkt1 on CE WFDSBC01a slot 0 with ifIndex 10 is UP 10 2013-04-30T20:08:28 CLEAR Packet port pkt2 on CE WFDSBC01a slot 0 with ifIndex 11 is UP 11 2013-04-30T20:08:29 CLEAR Packet port pkt3 on CE WFDSBC01a slot 0 with ifIndex 12 is UP