In this section:

This table lists status/statistics for Enhanced DBL Profile data.

Command Syntax

> show table addressContext default enhancedDBL
	enhancedDblPolicerStatus
	enhancedDblStatus
	trackingEntryStatus

Command Parameters

 

Note

Once an action is performed for a tracking entry, the statistics for that entry is displayed in the enhancedDblStatus.

Enhanced DBL Statistics

ParameterDescription

enhancedDblPolicerStatus

The collection of enhanced DBL policer status data. Included fields:

  • trunkGroupName
  • profileName
  • ruleName
  • cumulativeEnforcements – Cumulative blacklist enforcement count per rule.
  • policerEnforcements – Current blacklist enforcement count per rule.

enhancedDblStatus

A list of entries for which action have been taken due to enhanced DBL enforcement. Included fields:

  • ipAddress
  • port
  • transport
  • profileName
  • ruleName
  • currentAction – Current action type for this entry.
  • effectivePeriodRemaining – The remaining effective period for the action.
  • discardPacketCount – The blacklist packet discard count.

trackingEntryStatus

Displays the currently tracking entries based on the enhanced DBL enforcement.

  • sourceIpAddress
  • port
  • transport
  • profileName
  • ruleName
  • trunkGroupName
  • eventCount – Displays the number of offending events received for this entry thus far.
  • trackingStartTime – Displays the start time of the tracking entry.
  • resetCount – Displays the number of reset events received for this entry thus far.

Command Examples

Examples of 'show table' Commands
show table addressContext default enhancedDBL enhancedDblPolicerStatus
TRUNK
GROUP PROFILE RULECUMULATIVEPOLICER
NAMENAMENAMEENFORCEMENTSENFORCEMENTS
-------------------------------------------------------------
INGRESS_TGENH_DBL_PROFILE R11 1
 
show table addressContext default enhancedDBL enhancedDblStatus
SOURCEEFFECTIVEDISCARD
IP PROFILERULECURRENT PERIOD PACKET
ADDRESS PORTTRANSPORTNAME NAMEACTIONREMAININGCOUNT
---------------------------------------------------------------------------------
10.54.80.7 ENH_DBL_PROFILER1blacklist 55 1
 
show table addressContext default enhancedDBL trackingEntryStatus
SOURCETRUNK TRACKING
IP PROFILERULEGROUPEVENTSTART RESET
ADDRESS PORTTRANSPORTNAME NAMENAME COUNTTIMECOUNT
------------------------------------------------------------------------------------------------------
10.54.80.7 ENH_DBL_PROFILER1INGRESS_TG 62017-02-01T06:42:45+00:00 1
Examples of 'show status' Commands
show status addressContext default enhancedDBL enhancedDblStatus
enhancedDblStatus 10.54.80.7 TEST_ENH_DBL_PROF R1 {
 currentAction blacklist;
 effectivePeriodRemaining 55;
 discardPacketCount 1;
}

show status addressContext default enhancedDBL enhancedDblPolicerStatus
enhancedDblPolicerStatus INGRESS_TG TEST_ENH_DBL_PROF R1 {
 cumulativeEnforcements 1;
 policerEnforcements 1;
}

show status addressContext default enhancedDBL trackingEntryStatus
trackingEntryStatus 10.54.80.7 TEST_ENH_DBL_PROF R1 {
 trunkGroupName INGRESS_TG;
 eventCount 6;
 trackingStartTime 2017-02-01T06:42:45+00:00;
 resetCount 1;
}
Example of 'show configuration profiles' Command
show configuration profiles services enhancedDblProfile
enhancedDblProfile TEST_ENH_DBL_PROF {
 state enabled;
 rule R1 {
 state enabled;
 criteria {
 scope ipAddress;
 offendingEvent {
 triggerEventType receiptOfMessage;
 methodType REGISTER;
 methodResp [ 401 403 ];
 }
 occurrence {
 countType aggrCount;
 aggrCountValue 10;
 timerWindow 60;
 }
 }
 action {
 type blacklist;
 effectivePeriod 0;
 }
 }
 rule R2 {
 state enabled;
 criteria {
 scope ipAddress;
 offendingEvent {
 triggerEventType badSipMessage;
 }
 occurrence {
 countType aggrCount;
 resetMethodType REGISTER;
resetMethodResp [ 200 ];
 consecutive disabled;
 aggrCountValue 6;
 timerWindow 60;
 }
 }
 action {
 type watch;
 }
 }
}


  • No labels