This command allows to determine the reachability of the peer IP and peer port using the specified transport.
On SBC main screen, go to Troubleshooting > CallTrace and Logs > Cmds. The Commands window is displayed.
Troubleshooting - CallTrace and Logs - Cmds
Select optionsPing command from the drop-down list and click Select. A pop-up window appears with the required fields to be filled.
Troubleshooting - Cmds Parameters
The following fields are displayed:
Parameter
| Description
|
---|
Sig Port
| Specifies the Signaling Port to use for the ping. This field is mandatory. |
Peer IP Address
| Specifies the Peer SIP Address to ping. Enter IPv4 address in the following format: IPv4 - This is V4 IP address in dotted decimal form (for example 128.127.50.224).IPv6 - This is V6 IP address in hexadecimal/colon form (for example, 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).
This field is mandatory. |
Peer Port
| Specifies the Peer SIP Port Number to ping. |
Transport
| Specifies the Transport Protocol to use. Select any one of the following transport type: |
Peer FQDN | Specifies the value for peer SIP FQDN. |
Click optionsPing once all the required fields are added. The result of this action is displayed.
Troubleshooting - Cmds - Result
Click OK to exit.