In this section:

CAM Changes

For GW-GW calls on the SBC SWe and SBC SWe Cloud, a CDR is only generated for the ingress leg. If the generation mode is configured as origination and the populateRemoteGsxInfoState flag is enabled, the SBC logs billing information from the termination node.

Accounting File Version Change

The CAM version of SBC Core release 008.01.00 is 93.00.00.

For more information, refer to the section Billing Introduction.

CDR Field Changes

New CDR Fields in 08.01.00R000 Release

The new field "Call Established Time" is added to the CDRs with record type START/STOP/ATTEMPT/INTERMEDIATE. For more information, refer to CDR Examples

The new field " Over flow packets count" on CDR for Audio and Other streams (Video, Application) is added. This field is applicable for STOP record. For more information, refer to CDR Examples

Generating CDRs in Q-SBC Format

By default, the SBC Core generates CDRs in the standard SBC Core (former Sonus) format. For deployments that require it, users with admin privileges can configure the SBC Core to generate CDRs in the format of the (former GENBAND) Q-series SBCs. Similar to SBC Core CDRs, the Q-SBC format is an ASCII-format text file with multiple records per file. When you enable the Q-SBC format, the SBC Core populates CDR log files according to the mapping shown in the Q-SBC to SBC Core CDR Mapping table. Refer to Generating CDRs in Q-SBC Format for more information.