In this section:
The following objects are included in this table for completeness, but only apply when using the Show Table System command. Additionally, and administrative statistics shown below do not apply to 'show status oam' command.
ema, radiusAuthentication, traps
Shared Accounting Parameters - 'show status oam' and 'show table oam' Parameter Description Call CDR configuration. Configuration for external CDR servers. Configuration for external Radius servers. Shared Alarm Parameters - 'show status oam' and 'show table oam' Parameter Description This table contains the Ethernet CRC error alarm status, with following fields: This table contains system policer alarm configuration. This table contains system policer alarm status. This table contains Media SRTP Authorization error alarm configuration. This table contains the Media SRTP authorization error alarm status, with following fields: EMA Parameter - 'show table oam' only Parameter Description Shared Event Log Parameters - 'show status oam' and 'show table oam' Parameter Description Event Log Class Filter status table per card, with following fields: Platform audit logs configuration. Note: Not availiable for 'show status' command. Syslog configuration for platform Linux logs, with the fields: Note: Not available for 'show status' command. Subsystem Event Logging configuration table, with the fields (not available for 'show status' command): Event Log configuration table for configuration items related to each Event Log type, with following fields (not available for 'show status' command): Event Log status table for status items related to each Event Log type, with following fields: Shared Local Auth Parameters - 'show status oam' and 'show table oam' Parameter Description AAA services management, with following fields: Current status of the specified user, with following fields: CLI Statistics Details for 'show status' Displays RADIUS server name of each server. The following field is included. RADIUS server status details. The following fields are included. CLI Statistics Details for 'show table' RADIUS server configuration details of each server. The following field is included. RADIUS server status details. The following fields are included. RADIUS server Retry criteria settings. The following fields are included. Shared SNMP Parameter - 'show status oam' and 'show table oam' Parameter Description This table contains SNMP community information. This table contains SNMP community strings used in a SNMP request, with following fields: SNMPv3 SNMP-USER-BASED-SM-MIB usmUserEngineID and SNMP-COMMUNITY-MIB snmpCommunityContextEngineID SNMPv3 SNMP-VIEW-BASED-ACM-MIB vacmAccessSecurityLevel for all users in model 0 and 3. Trap target configuration details, with following fields: Auth key and Priv key details for each user, with following fields: SNMP version currently supported. Traps Parameters - 'show table oam' only Parameter Description The sonusTrapTable identifies the SNMP notifications that this node supports. DSP resource usage trap configuration.Accounting
Command Syntax
> show table oam accounting
admin
earlyAttemptState
eventAcctMethods
eventAcctPsxInfoState
eventAcctState
generationMode
intermediateAcctInterval
intermediateAcctMode
intermediateAcctState
intermediateLongDurGenTime
intermediateLongDurThreshold
intermediateTrapState
maxRecordSequenceNum
populateIpTgFarEndSwitchType
populateNonPortedLnpNumbers
populateRemoteGsxInfoState
secondStageInheritFirstStage
sendEgressCdrInfoOnReceipt
startAcctState
cdrServer
admin
type
ipAddress
cdrPort
useSshKeyFile
username
password
path
filePrefix
filePostfix
connectionTimeout
transferTimeout
bufferSize
status <primary or secondary>
failedTransfers
pendingTransfers
progress
state
successfulTransfers
radius
accountingAdmin
failoverPolicy
maxErrorRate
maxNoResponseTime
maxPacketRetryCount
maxQueuedPacketsInMemory
nasIdentifier
nasIpAddress
radiusUserDetails
sendNasIdentifier
sendNasIpAddress
state
radiusServer
radiusServerStatus
Command Parameters
admin
earlyAttemptState
– Identifies whether early ATTEMPT accounting is enabled or disabled.eventAcctMethods
– Log event records for the methods specified in the configuration.eventAcctPsxInfoState
– EVENT records relating to PSX are generated if enabled.eventAcctState
– EVENT records are generated if enabled.generationMode
– Identifies the accounting generation mode for the node.intermediateAcctInterval
– Identifies the Intermediate Accounting Interval in seconds
NOTE: this object is only applicable when sonusAcctIntAcctMode
is set to "interval(1)".intermediateAcctMode
– Identifies the intermediate record generation mode for the node.intermediateAcctState
– Identifies whether Intermediate Accounting is Enabled or Disabled for the NodeintermediateLongDurGenTime
– Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records.intermediateLongDurThreshold
– Identifies the Accounting Intermediate Records Duration in hours.intermediateTrapState
– Identifies whether a trap will be generated whenever an INTERMEDIATE record is generated.maxRecordSequenceNum
– Specifies the maximum record sequence number for logging the CDR records.populateIpTgFarEndSwitchType
–
Specifies whether or not Ingress Far End Switch Type is used to passed down from the PSX the IP trunk group for SIP ingress calls.populateNonPortedLnpNumbers
– Specifies whether or not to populate the Called Number Before Translation field in the accounting record under the following conditions:
1) for a number for which an LNP lookup was performed
2) the lookup indicated that the number has not been ported.populateRemoteGsxInfoState
- Identifies whether a destination SBC propagates its billing data to originating GSX/SBC for GW-GW calls.secondStageInheritFirstStage
- This indicates whether or not second stage accounting records for two-stage calls inherit fields from the first stage call.sendEgressCdrInfoOnReceipt
- This indicates whether or not to send the egress CDR info immediately after receiving and processing it.startAcctState
- Identifies whether Start Accounting is enabled or disabled for the node.cdrServer
admin
(not available with 'show status' command)type
ipAddress
cdrPort
useSshKeyFile
username
password
path
filePrefix
filePostfix
connectionTimeout
transferTimeout
bufferSize
status
type
state
progress
successfulTransfers
failedTransfers
pendingTransfers
radius
accountingAdminradiusServer
failoverPolicy
maxErrorRate
maxNoResponseTime
maxPacketRetryCount
maxQueuedPacketsInMemory
nasIdentifier
nasIpAddress
radiusUserDetails
sendNasIdentifier
sendNasIpAddress
state
radiusServerStatus
Alarms
Command Syntax
> show table oam alarms
ethernetCrcErrAlarm
ethernetCrcErrAlarmStatus
ipPolicingAlarmAdmin
majorAlarmMode
majorAlarmProfileName
minorAlarmMode
minorAlarmProfileName
ipPolicingAlarmStatus
aclAlarmDuration
aclAlarmLevel
aclDiscardRate
aclPacketsAccepted
aclPacketsDiscarded
aggregateAlarmDuration
aggregateAlarmLevel
aggregateDiscardRate
aggregatePacketsAccepted
aggregatePacketsDiscarded
arpAlarmDuration
arpAlarmLevel
arpDiscardRate
arpPacketsAccepted
arpPacketsDiscarded
badEthernetIpHeaderAlarmDuration
badEthernetIpHeaderAlarmLevel
badEthernetIpHeaderDiscardRate
badEthernetIpHeaderPacketsDiscarded
discardRuleAlarmDuration
discardRuleAlarmLevel
discardRuleDiscardRate
discardRulePacketsDiscarded
ipSecDecryptAlarmDuration
ipSecDecryptAlarmLevel
ipSecDecryptDiscardRate
ipSecDecryptPacketsDiscarded
mediaAlarmDuration
mediaAlarmLevel
mediaDiscardRate
mediaPacketsDiscarded
rogueMediaAlarmDuration
rogueMediaAlarmLevel
rogueMediaDiscardRate
rogueMediaPacketsDiscarded
srtpDecryptAlarmDuration
srtpDecryptAlarmLevel
srtpDecryptDiscardRate
srtpDecryptPacketsDiscarded
uFlowAlarmDuration
uFlowAlarmLevel
uFlowDiscardRate
uFlowPacketsAccepted
uFlowPacketsDiscarded
mediaSrtpErrAlarm
mediaSrtpErrAlarmStatus
Command Parameters
ethernetCrcErrAlarm
This table contains Ethernet CRC error alarm configuration. ethernetCrcErrAlarmStatus
<interface name>
currentErrRate
maxErrRate
totalCrcErrors
numAlarmsRaised
currentAlarmState
ipPolicingAlarmAdmin
majorAlarmMode
majorAlarmProfileName
minorAlarmMode
minorAlarmProfileName
ipPolicingAlarmStatus
aclAlarmDuration
aclAlarmLevel
aclDiscardRate
aclPacketsAccepted
aclPacketsDiscarded
aggregateAlarmDuration
aggregateAlarmLevel
aggregateDiscardRate
aggregatePacketsAccepted
aggregatePacketsDiscarded
arpAlarmDuration
arpAlarmLevel
arpDiscardRate
arpPacketsAccepted
arpPacketsDiscarded
badEthernetIpHeaderAlarmDuration
badEthernetIpHeaderAlarmLevel
badEthernetIpHeaderDiscardRate
badEthernetIpHeaderPacketsDiscarded
discardRuleAlarmDuration
discardRuleAlarmLevel
discardRuleDiscardRate
discardRulePacketsDiscarded
ipSecDecryptAlarmDuration
ipSecDecryptAlarmLevel
ipSecDecryptDiscardRate
ipSecDecryptPacketsDiscarded
mediaAlarmDuration
mediaAlarmLevel
mediaDiscardRate
mediaPacketsDiscarded
rogueMediaAlarmDuration
rogueMediaAlarmLevel
rogueMediaDiscardRate
rogueMediaPacketsDiscarded
uFlowAlarmDuration
uFlowAlarmLevel
uFlowDiscardRate
uFlowPacketsAccepted
uFlowPacketsDiscarded
mediaSrtpErrAlarm
mediaSrtpErrAlarmStatus
<system name>
currentErrRate
maxErrRate
totalSrtpErrors
numAlarmsRaised
currentAlarmState
EMA
Command Syntax
> show table oam ema clientAuthMethod
Command Parameter
clientAuthMethod
Show EMA current setting of client authorization method. Event Log
Command Syntax
> show table oam eventLog
confdDebugLevel
dataAgentAdmin
dataAgentStatus
filterAdmin
filterStatus
memusage
platformAuditLogs
platformRsyslog
subsystemAdmin
typeAdmin
typeStatus
Command Parameters
confdDebugLevel
Current debug level for ConfD components. dataAgentAdmin
Configuration for sending logs to a remote data warehouse. dataAgentStatus
Status of the remote data warehouse. filterAdmin
Event Log Class Filter configuration table per card, with following fields (not available for 'show status' command) : ceName
type
– event typeeventClass
level
state
filterStatus
ceName
type
– event typeeventClass
eventsFiltered
– Number of events filtered for the associated event type and class.memusage
Process memory usage logging controls. platformAuditLogs
state
– Administrative state of platform audit logging.platformRsyslog
syslogState
servers
(table) linuxLogs
(table) subsystemAdmin
ceName
systemId
infoLogState
minEventId
maxEventId
typeAdmin
type
state
fileCount
fileSize
messageQueueSize
saveTo
filterLevel
rolloverStartTime
rolloverInterval
rolloverType
rolloverAction
fileWriteMode
syslogState
renameOpenFiles
eventLogValidation
typeStatus
type
currentFile
fileRecords
fileBytes
totalFiles
totalFileBytes
filesDropped
nextRollover
logDestination
lastFileDrop
infoLevelLoggingDisabled
Local Auth
Command Syntax
> show table oam localAuth
user
userStatus
Command Parameters
user
name
– User name.group
– The group that the user is a member of.accountAgingState
– The state of account expiry for the user.interactiveAccess
– Whether the user is allowed to access interactive interfaces like CLI/EMA.m2mAccess
– Whether the user is allowed to access machine to machine interfaces like REST.passwordAgingState
– The state of password expiry for the user.passwordLoginSupport
– Whether the user is allowed to login using password.userStatus
name
– User name.currentStatus
– Current status of the user account.userId
– User ID number.Radius Authentication
Command Syntax
> show table oam radiusAuthentication
radiusServer
radiusStatus
retryCriteria
Command Parameters
Parameter Details radiusServer
radiusServer
– Name of radius serverradiusStatus
status
– Either available or unavailableavailableAt
– The time when the server is automatically put back into 'available' state.Parameter Details radiusServer
serverName
– RADIUS server namepriority
– The order the SBC uses to attempt RADIUS authentication. The RADIUS server with the lowest priority is contacted first.state
– Operational state of the RADIUS server.radiusServerIp
– IPv4 address of the RADIUS server.radiusServerPort
– The RADIUS server port to which the SBC sends the request.radiusNasIp
– IPv4 address of the SBC to send in ACCESS_REQUESTradiusSharedSecret
– The shared secret used to encrypt the data exchanged between SBC and RADIUS server.mgmtInterfaceGroup
– Name of the Management Interface Group to connect to this RADIUS server.radiusStatus
serverNameId
– RADIUS server namestatus
– Either available or unavailableavailableAt
– The time when the server is automatically put back into 'available' state.retryCriteria
retryTimer
– Time in milliseconds before the SBC attempts another authentication request.retryCount
– Number of retries the SBC uses to attempt authentication.oosDuration
– Time in minutes the RADIUS server remains out of service after a timeout.SNMP
Command Syntax
> show table oam snmp
community engineId
trapTarget
ipAddress
port
state
trapType
Command Parameters
community
communityString
snmpCommunityIndex
snmpCommunityName
localEngineId
securityLevel
trapTarget
name
ipAddress
port
trapType
targetUsername
targetSecurityLevel
state
users
username
group
authProtocol
authKey
privProtocol
privKey
version
Traps
Command Syntax
> show table oam traps
admin <traps>
dspAdmin
callFailureTrap lackdsp
interval
threshold
dspAvailabilityTrap
allThreshold
g711PacketThreshold
g726Threshold
g729Threshold
Command Parameters
admin
<trap name>
priorityLevel
– Lists any user-defined priority levels overriding the default pre-compiled level.state
– Determines if this SNMP trap is transmitted to any management client.dspAdmin
callFailureTrap lackdsp
– Trap configuration for Call Failure due to no DSP.interval
– Indicates the time interval for the threshold of call failure due to lack of DSP pad.threshold
– Indicates the number of call failure due to lack of DSP pad threshold.dspAvailabilityTrap
– DSP Availability trap threshold configuration.allThreshold
– Indicates the percentage DSP Availability threshold for all types.g711PacketThreshold
– Indicates the percentage of G711 Packet type DSP Availability threshold.g726Threshold
– Indicates the percentage of G726 type DSP Availability threshold.g729Threshold
– Indicates the percentage of G729 type DSP Availability threshold.
To display status of OAM SNMP objects:
> show status oam snmp community engineId engineId 80:00:0b:3f:03:00:10:6b:02:c7:ef;
To display the status of OAM Eventlog objects:
> show status oam eventLog typeStatus security currentFile 1000006.SEC; fileRecords 6; fileBytes 986; totalFiles 31; totalFileBytes 10955; memoryRecords 0; memoryBytes 0; filesDropped 0; memoryDropped 0; nextRollover 0; logDestination localDisk; lastFileDrop 0000-00-00T00:00:00Z; lastMemoryDrop 0000-00-00T00:00:00Z;
When NP 0 error counter messages are received in the DBG logs, the Ethernet Switch configuration (Datalink Device L2) is checked. If the Switch is overloaded with traffic,
Every Switch vendor has their own command to display the drop counts. Therefore, the respective document must be checked to check the drop counts.