Sub-Field Description Sub-Field 1 Protocol Variant (String up to 16 characters, for example, "SIP or SIP-T") Sub-Field 2 Call ID (variable length string up to 256 characters, for example: 44-871244022@sylcs.rbbn.com). Sub-Field 3 From Field (variable length string up to 256 characters, for example: 3211941116@10.99.55.6) Sub-Field 4 To Field (variable length string up to 256 characters, for example: 2971612002@10.20.9.73) Sub-Field 5 Redirect Attempt Count (number of times that the call was redirected before being connected, a decimal number 0-255) Sub-Field 6 Reserved (The field is empty in case of SIP.) NOTE: SIP-I/T Version String (variable length string of up to 23 characters, which contains the MIME version, for example "itu-t92+". Sub-Field 7 Display name of SIP URI PAI header.This field is presented in ISUP signaling messages received at the gateway, such as IAM, SGM, etc. The content details the reason that the caller number (or "caller identification") was not provided and displayed. Example strings are "Unavailable", "Anonymous", "Coin line", or "payphone". Sub-Field 8 User parameter of P-K-CallForwardingLast header (variable length string of up to 24 characters, or empty). This field is presented in ISUP messages received at the gateway such as IAM, SGM, etc. The content is the username information that is in the P-K-CallForwardingLast header "u=" parameter of the INVITE. Example strings are "john_doe", "joe1234", and "987654321". Sub-Field 9 Userinfo and Hostname of SIP request URI header (variable length string of up to 256 characters or empty). The content is the username and hostname fields of the Request URI of the initial SIP INVITE message. Example strings are "sip:john@somewhere.com", "sip:joe123@4.3.2.1", "sip:987654321@anywhere.com", "sip:+1987654321@3.4.5.6;dtg=sip", and "tel:987654321". If a comma (,) occurs within this sub-field, then the escape sequence "%2C" will replace the comma. For example: is rendered as: "sip:1234567890;isub=1234%2C5678@10.7.11.186:5060" If a percent symbol (%) occurs within this sub-field, then the escape sequence "%25" replaces the percent symbol itself. NOTE: If FQDN is used by the SBC when processing the call, this field may not contain the actual Request URI of the initial SIP INVITE message. It may contain an FQDN value in place of an IP address. Sub-Field 10 Userinfo and Hostname of SIP URI PAI header (variable length string of up to 128 characters or empty). The content is the username and hostname fields of the P-Asserted-Id (PAI) header that is in SIP URI address scheme of the initial SIP INVITE message. Example strings are "john@somewhere.com", "joe123@4.3.2.1", "987654321@anywhere.com", and "+1987654321@3.4.5.6". Sub-Field 11 Username parameter of the Proxy-Authorization header (variable length string of up to 20 characters or empty). The content is the "username=" parameter value of the Proxy-Authorization header contained in the initial SIP INVITE message. Example strings are "tst1234", "janedoe", and "7654321". Sub-Field 12 Displayname of Tel URI PAI header (variable length string of up to 11 characters or empty). The content is the display name of the P-Asserted-Id (PAI) header that is in Tel URI address scheme of the initial SIP INVITE message. Example strings are "9876543210", and "05030450095". Sub-Field 13 INVITE Contact header (variable length string of up to 128 characters or empty). The content is the Contact header of the initial SIP INVITE message. Example strings are "sip:john@somewhere.com:5060", "sip:john@somewhere.com:5060;transport=udp", "sip:joe123@4.3.2.1:5060;transport=udp", "sip:987654321@anywhere.com:5060;transport=udp", "sip:+1987654321@3.4.5.6:5060;transport=udp", "sip:10.192.168.70:5060", and "sip:10.192.168.70:5060;transport=udp". Sub-Field 14 200 OK INVITE Contact header (variable length string of up to 128 characters or empty). The content is the Contact header of the 200 OK response to the initial SIP INVITE message. Example strings are "sip:john@somewhere.com:5060", "sip:john@somewhere.com:5060;transport=udp", "sip:joe123@4.3.2.1:5060;transport=udp", "sip:987654321@anywhere.com:5060;transport=udp", "sip:+1987654321@3.4.5.6:5060;transport=udp", "sip:10.192.168.70:5060", and "sip:10.192.168.70:5060;transport=udp". Sub-Field 15 Redirecting Reason parameter of P-K CallForwardOriginal header (variable length of up to 4 characters or empty). The content is the redirecting reason value of "r=" parameter in the P-K-CallForwardOriginal header of the SIP INVITE message. Example strings are "cfb", "cfnr", "cfu", "cda", "cdi", and "msnr". Sub-Field 16 Username of Tel URI PAI header (variable length string of up to 127 characters or empty). The content is the username of P-Asserted-Id (PAI) header that is in Tel URI address scheme of the initial SIP INVITE message. Example strings are "9876543210", and "+8105030450095", etc. Sub-Field 17 The contractor number value in the "cntrct=" parameter of the "P-Sig-Info" header that is sent or received in the SIP INVITE message (variable length string of up to 16 characters or empty). Sub-Field 18 ACK received for 200 OK (1 decimal charaValuecter enumeration or empty) This field specifies whether a SIP ACK message was received in response to a SIP 200 OK message. When the SIP 200 message is sent, the START record has already been generated. However, the A party has not picked up the SIP phone until this message is received. The valid values are: Sub-Field 19 Status Message For Call Release (3 characters or empty) This field specifies the SIP message received to cause release or transmitted in response to release on this call leg. Used in combination with the disconnect initiator field (#57), you can determine if this message was sent or received on this call leg. For internally disconnected calls, both legs are transmitting the message specified for that leg. The valid values are: Sub-Field 20 Reason Header Value Q850 (variable length string of up to 3 decimal characters or empty) This field specifies the Reason Header value that was sent or received in a SIP message. The valid values are: Sub-Field 21 NAPT Status of the SIP Service Group for Signaling (1 decimal character enumeration or empty) This field contains the NAPT status of the SIP service group for signaling. The valid values are: Sub-Field 22 NAPT Status of the SIP Service Group for Media (1 decimal character enumeration or empty) This field contains the NAPT status of the SIP service group for media. The valid values are: Sub-Field 23 Original Peer SDP Address for NAPT or ICE (variable length string up to 15 characters or empty) This field contains the original peer SDP IP address, in dotted decimal format, received in the SDP from the peer when NAPT is enabled. This field is empty if original peer SDP address is not available or if media is NAPT disabled. An example string is 123.14.15.16 Sub-Field 24 UUI Sending Count (variable length string of up to 2 decimal characters or empty) This field contains the number of UUI parameters sent from the a-party. This data comes from the incoming SIP messages INVITE, 18X, 4XX, 5XX, 6XX, BYE, CANCEL, and 200 OK. On the PSX, the IP PROFILE must have the UUI parameter enabled for SIP. The valid values are: Sub-Field 25 UUI Receiving Count (variable length string of up to 2 decimal characters or empty. This field contains the number of UUI parameters sent from the a-party. This data comes from the incoming SIP messages INVITE, 18X, 4XX, 5XX, 6XX, BYE, CANCEL, and 200 OK. On the PSX, the IP PROFILE must have the UUI parameter enabled for SIP. The valid values are: Sub-Field 26 Service Information (3 decimal character enumeration or empty). This field contains service related information associated with the call. This field was initially added to carry the DPNSS Ring Back When Free service information. This field is populated from the received INVITE message. The valid values are: Sub-Field 27 ICID (variable length string of up to 127 characters or empty). This field is a unique string used to identify a session. For ingress Protocol Variant Specific Data fields (PVSD), this field is populated from the "icid-val" parameter of the P-Charging-Vector header from the received INVITE message. This field is empty if the incoming INVITE does not contain the P-Charging-Vector header. For egress PVSD, this field is populated from the "icid-val" parameter of the P-Charging-Vector header from the INVITE message that is sent. This field is empty if the "Creating P-Charging-Vector" flag and the "Transparent P-Charging-Vector" flag of the PSX IP Signaling Profile are both false. An example string is "3cbed620-0001-1000-00-0000-10-6b-00-02-20". Sub-Field 28 Generated Host (variable length string of up to 127 characters or empty). This field indicates the node at which the "icid-val" parameter of the P-Charging-Vector header was generated. For ingress PVSD, this field is populated from the "icid-generated-at" parameter of P-Charging-Vector header from the received INVITE message. This field is empty if the received INVITE does not contain the P-Charging-Vector header. For egress PVSD, this field is populated from "icid-generated-at" parameter of P-Charging-Vector header from the INVITE message that is sent. This field is empty if the "Creating P-Charging-Vector" flag and the "Transparent P-Charging-Vector" flag of the PSX IP Signaling Profile are both false. An example string is 10.10.10.10. Sub-Field 29 Originating IOI (variable length string of up to 127 characters or empty). This field identifies the network that originated the SIP dialog. For ingress PVSD, this field is populated from the "orig-ioi" parameter of the P-Charging-Vector header from the received INVITE message. This field is empty if the received INVITE does not contain the P-Charging-Vector header. For egress PVSD, this field is populated from the "orig-ioi" parameter of the P-Charging-Vector header from the backwards response received or from the INVITE message that is sent. This field is empty if the backward response or the INVITE message that is sent does not contain the "orig-ioi" parameter in the P-Charging-Vector header. An example string is home1.net. Sub-Field 30 Terminating IOI (variable length string of up to 127 characters or empty). This field identifies the network that terminated the SIP dialog. For ingress PVSD, this field is populated from the "term-ioi" parameter of the P-Charging-Vector header from the received INVITE message. This field is empty if the received INVITE does not contain the P-Charging-Vector header. For egress PVSD, this field is populated from the "term-ioi" parameter of the P-Charging-Vector header from the backwards response received or the INVITE message that is sent. This field is empty if the backward response or the INVITE message that is sent does not contain the "term-ioi" parameter in the P-Charging-Vector header. An example string is dest.net. Sub-Field 31 Special Routing Table Number in the P-K-Adn Header (variable length string of up to 30 alphanumeric or + characters or empty). This field contains the Special Routing Table Number which is sent in theP-K-Adn header. An example string is "01793601014". Sub-Field 32 IP Address for FQDN calls or IP address of route header selected as next hop (variable length string of up to 15 characters or empty). An example string is 123.14.15.16. Sub-Field 33 Transport Protocol. Transport protocol used to setup the SIP call The valid values are: Sub-Field 34 Direct Media Call.This field contains "1" if direct media has been used on the call leg, otherwise "0" (media flow is through the SBC). NOTE: When a call is established as an ICE direct media call, SBC does not support media handling. Therefore, the existing CDR fields are populated for Ingress and Egress local Ip address/ports as 255.255.255.255/65535 and Ingress and Egress remote IP address/ports as 127.0.0.0/5004 for each of the media streams on the call. Sub-Field 35 Inbound SMM Indicator.This field contains the inbound SIP Message Manipulation status. The valid values for this field are: Sub-Field 36 Outbound SMM Indicator. This field contains the outbound SIP Message Manipulation status. The valid values are Originating Charge Area Terminating Charge Area Feature Tag in Contact Header Feature Tag in Accept-Contact Header Sub-Field 41 P-Charging-Function-Address Sub-Field 42 P-Called-Party-Id Sub-Field 43 P-Visited-Network-Id Direct Media with NAPT Call. The valid values are: Ingress SMM Profile Name An example string is "Ingress SMM". Egress SMM Profile Name An example string is "Egress SMM". P-Access-Network-Information header NOTE: This field is not generated in an ATTEMPT record. IMS Node functionality The valid values are: NOTE: This field is not generated in an ATTEMPT record. IMS node role The valid values are: NOTE: This field is not generated in an ATTEMPT record. IMS Use PcfaCcf Field Type: Decimal The valid values are: P-CSCF calling party P-CSCF called party ICE used on Call ICE Complete - Time-stamp when ICE Completes Transit IOI List Loop Back Ravel Call Optimal Media Routing Applied IMS PAI Service header Feature-Caps header Called Asserted Identity NNI-Type The valid values are: Neighbour Address Relationship mode The valid values are: Session direction The valid values are: SMM CDR Field #1. This field represents either SIP message Header Value, Parameter value, Token value or value stored in SMM variable as a result of the execution of a SMM rule storing value to SMM CDR Field #1 respectively. SMM CDR Field #2. This field represents either SIP message Header Value, Parameter value, Token value or value stored in SMM variable as a result of the execution of a SMM rule storing value to SMM CDR Field #2 respectively. SMM CDR Field #3. This field represents either SIP message Header Value, Parameter value, Token value or value stored in SMM variable as a result of the execution of a SMM rule storing value to SMM CDR Field #3 respectively. SMM CDR Field #4. This field represents either SIP message Header Value, Parameter value, Token value or value stored in SMM variable as a result of the execution of a SMM rule storing value to SMM CDR Field #4 respectively. SMM CDR Field #5. This field represents either SIP message Header Value, Parameter value, Token value or value stored in SMM variable as a result of the execution of a SMM rule storing value to SMM CDR Field #5 respectively. Origination ID A globally unique string corresponding to a Universally Unique Identifier (UUID)(RFC 4122).The purpose of the unique origination identifier is to assign an opaque identifier corresponding to the service provider-initiated calls themselves, customers, classes of devices, or other groupings that a service provider might want to use for determining things such as reputation or trace back identification of customers or gateways. STI Service Type (Secure Telephone Identity Service Type) The valid values are: STI Service Status (Secure Telephone Identity Service Status) Max Length:1 The valid values are: STI Reason Code (Secure Telephone Identity SIP Reason Code). SIP reason code corresponding to the STI Service.
"sip:1234567890;isub=1234,5678@10.7.11.186:5060"
Example strings are "0311112222" and "9876543210654321".Values Name empty Not present 0 ACK not recieved 1 ACK recieved Value Name empty Not present 400-700 Message Name/ID 703 Message Name/ID BYE BYE message received CAN CANCEL message received 729 DNS related error Value Name empty Not present 1-127 The range of recognized reason values in the Q850 standard Value Name empty Unknown, such as a parse failure. 0 NAPT is disabled for signaling for the SIP service group involved for this leg of the call. 1 NAPT is enabled for signaling for SIP service group involved for this leg of the call. Value Name empty Unknown, such as a parse failure. 0 NAPT is disabled for media for the SIP service group involved for this leg of the call. 1 NAPT is enabled for media for the SIP service group involved for this leg of the call. Value Name empty Not present 0-99 The number of UUI parameters sent from the a-party. Value Name empty Not present 0-99 The number of UUI parameters received by the a-party. Value Name empty An ordinary call with no service information. 1 CPC_SVC_INFO_DPNSS_REAL (real call established for ring back when free). 2 CPC_SVC_INFO_DPNSS_VIRTUAL (virtual call established for ring back when free) Value Name 0 Unknown Transport 1 UDP 2 TCP 3 TLS/TCP 4 SCTP Values Name 0 No SIP Message Manipulation 1 Successful SIP Message Manipulation 2 SIP Message Manipulation Error Value Name 0 No SIP Message Manipulation 1 Successful SIP Message Manipulation 2 SIP Message Manipulation Error Sub-Field 37
The valid values are:Sub-Field 38
The valid values are:Sub-Field 39 Sub-Field 40 Sub-Field 44 Value Name 0 Media flow through the SBC, or basic Direct Media 1 Direct Media with NAPT Sub-Field 45
This field contains the Inbound SIP Message Manipulation Profile Name that was executed against a session.Sub-Field 46
This field contains the Outbound SIP Message Manipulation Profile Name that was executed against a session.Sub-Field 47 Sub-Field 48 Value Name 1 P-CSCF 6 AS 7 IBCF 11 E-CSCF Sub-Field 49 Value Name 0 originating 1 terminating Sub-Field 50 Value Name Empty PcfaCcf is not in use 1 PcfaCcf is in use Sub-Field 51 Sub-Field 52 Sub-Field 53 Sub-Field 54 Sub-Field 55 Sub-Field 56 Sub-Field 57 Sub-Field 58 Sub-Field 59 Sub-Field 60 Sub-Field 61 Value Name 0 non roaming 1 roaming without loopback 2 roaming with loopback Sub-Field 62 Sub-Field 63 Value Name 0 trusted 1 untrusted Sub-Field 64 Value Name 0 inbound 1 outbound Sub-Field 65 Sub-Field 66 Sub-Field 67 Sub-Field 68 Sub-Field 69 Sub-field 70 Sub-field 71 Value Name 0 None 1 Signing 2 Verification 3 Tagging Sub-field 72 Value 0 None 1 Success 2 Failure Sub-Field 73
This SIP variant is delimited by the delimiter "". The sub-fields are separated by a comma (,). An empty field is represented by either two consecutive commas (,,) or by comma-space-comma (, ,).
For example:
"SIP,2203_1034102674@10.6.30.27:34975,<sip:9876543210@10.6.30.27:34975>;tag=1034102674,<sip:7661112222@10.13.1.35:4000>;tag=gK098024b6,0,,,,sip:7661112222@10.13.1.35:4000,user1@rbbn.com,aliceinthewonderland,9876543210,sip:9876543210@10.6.30.27:34975,sip:7661112222@10.13.1.35:4000,msnr,9876543212,,1,,,0,0,,3,3,1,3cbed620-0001-1000-00-0000-10-6b-00-02-20,10.10.10.10,home1.net,dest.net,01793601014,123.14.15.16,0,0"
If a double quote ("") occurs within a sub-field, then the escape sequence "%22" replaces the double quote.
For example, the SIP Protocol Variant:
"SIP,f26b0300-464a4c40-7704286-322e3031@10.20.9.68,"6976921234" <sip:6976921234@10.99.55.6>;tag=, <sip:3216921115@10.99.55.6>;tag=34,,unavailable,joe123@4.3.2.1,cda,+8105030450095,0311112222,1,BYE,32,0,0,,3,3,1,3cbed620-0001-1000-00-0000-10-6b-00-02-20,10.10.10.10,home1.net,dest.net,01793601014,123.14.15.16,0,0"
is rendered as:
"SIP,f26b0300-464a4c40-7704286-322e3031@10.20.9.68,%226976921234%22 <sip:6976921234@10.99.55.6>;tag=, <sip:3216921115@10.99.55.6>;tag=34,,unavailable,joe123@4.3.2.1,cda,+8105030450095,0311112222,1,BYE,32,0,0,,3,3,1,3cbed620-0001-1000-00-0000-10-6b-00-02-20,10.10.10.10,home1.net,dest.net,01793601014,123.14.15.16,0,0"