This parameter configures the name of the terminating Inter Operator Identifier (IOI). The SBC creates and sends the termIOI parameter when there is no egress network, which occurs when the call is terminated in the script. When there is an egress network, the termIOI parameter is received from the egress network. The termIOI sends the terminating networking identifier to the ingress network.
Use the following command to configure the termIOI parameter.
Command Syntax
set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sipTrunkGroup name> signaling termIOI <termIOI name>
Command Parameters
Allow Bye Challenge Parameter
| Parameter | Length/Range | Description |
|---|---|---|
termIOI | 1-63 | Sends the terminating networking identifier to the ingress network. |
Overview
Content Tools