This object specifies parameters that are sent out as part of the outgoing signaling message after standard protocol rules have been applied. You can associate signaling profiles with carriers and trunk groups. A signaling profile can also be used to enable selected ingress call processing functions.

To View Signaling Profile

On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Signaling Profile. The Signaling Profile window is displayed.

Call Routing - Profiles - Signaling Profile

To Edit Signaling Profile

To edit any of the Signaling Profile in the list, click the radio button next to the specific Signaling Profile name.

Call Routing - Signaling Profile Highlighted

 

The Edit Selected Signaling Profile window is displayed below.

Call Routing - Profiles - Signaling Profiles Edit Window

To Create Signaling Profile

To create a new Signaling Profile, click New Signaling Profile tab on the Signaling Profile List panel.

Call Routing - Profiles - Signaling Profile Fields

 

The Create New Signaling Profile window is displayed.

Call Routing - Profiles - Signaling Profile Create Window

 

The following fields are displayed:

Signaling Profile Parameters

Parameter

Description

Name

Indicates the name of the signaling profile.

Nature of Address

Specifies the type of Ip Address. The options are:

  • international
  • national
  • networkSpecific
  • passThrough
  • subscriber
  • unknown (default)

Transit Carrier Indicator

List the different transit carrier indicators. The options are:

  • backward
  • bidirection
  • forward
  • noTransmission (default)
  • nonProvisioned
  • oredBackward
  • oredForward
  • passThrough

Generic Digit Type

The Generic Digit Type, which is to be interpreted to contain the Switch ID and Trunk
Group ID.

Access Transport

Include the Access Transport parameter in any messages in either the forward or backward direction before they are sent over the associated trunk group.

The options are:

  • disable
  • enable (default)

User to User
Information

When Enabled, Includes the User to User parameter in any messages in either the forward or backward direction before they are sent over the associated trunk group. When Disabled, discards the User to User parameter from messages before they are sent over the associated trunk group. The options are:

  • disable
  • enable (default)

To Copy Signaling Profile

To copy any of the created Signaling Profile and to make any minor changes, click the radio button next to the specific Signaling Profile to highlight the row.

Call Routing - Signaling Profile Highlighted

 

Click Copy Signaling Profile tab on the Signaling Profile List panel.

Call Routing - Profiles - Signaling Profile Fields

 

The Copy Selected Signaling Profile window is displayed along with the field details which can be edited.

Call Routing - Profiels - Signaling Profile Copy Window

 

Make the required changes to the required fields and click Save to save the changes. The copied Signaling Profile is displayed at the bottom of the original Signaling Profile in the Signaling Profile List panel.

To Delete Signaling Profile

To delete any of the created Signaling Profile, click the radio button next to the specific Signaling Profile which you want to delete.

Call Routing - Signaling Profile Highlighted

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Call Routing - Profiles - Signaling Profile Delete Confirmation

 

Click Yes to remove the specific Signaling Profile from the list.

 

  • No labels