In this section:

Related articles:

Use this window to configure privacy profiles that govern how the SBC applies privacy services. Profiles can be assigned to ingress or egress SIP trunk groups and therefore allows handling privacy independently on each call leg. Options in this profile determine how privacy:id and privacy:user are handled. It also can specify to removed non-essential headers that are added by the user agent, including the Subject, Call-Info, Organization, User-Agent, Reply-To, and In-Reply-To headers.

For details on the privacy handling that is governed by the Privacy Profile, refer to Caller Privacy Support.

Command Syntax

% set profiles services privacyProfile <privacyProfile>
	applyPrivacyId <disabled | enabled>
	applyPrivacyUser <disabled | enabled>
	passThruPrivacyInfo <disabled | enabled>
	supportPrivacyId <disabled | enabled>
	supportPrivacyUser <disabled | enabled>

Command Parameters

The Privacy Profile parameters are defined below:

Privacy Profile Parameters

ParameterLength/RangeDescription

privacyProfile <name>

1-23 characters

<privacyProfile name> – The unique name for this Privacy Profile. This profile is used to apply privacy services independently on each call leg.

NOTE: To attach this Privacy Profile to a trunk group, refer to SIP Trunk Group - Services - CLI.

applyPrivacyIdN/A

If the incoming SIP message contains "privacy: Id" and this flag is enabled, the SBC does not include P-Asserted-Id header in the egress message.

  • disabled (default)
  • enabled

applyPrivacyUser

N/A

If the incoming SIP message contains "privacy: user" and this flag is enabled, the SBC anonymizes FROM and Contact headers.

  • disabled (default)
  • enabled

passThruPrivacyInfo

N/A

NOTE: This flag overrides the other privacyProfile flags.

If this flag is enabled, the Privacy header is passed transparently to the outgoing message and the SBC sends P-Asserted-Id or FROM header as received.

  • disabled
  • enabled (default)

supportPrivacyId

N/A

If this flag is enabled, the outgoing SIP message from the SBC does not include the P-Asserted-Id header even though the incoming message does not contain "privacy: id" header.

  • disabled (default)
  • enabled

supportPrivacyUser

N/A

If this flag is enabled, the outgoing SIP message from the SBC includes anonymized FROM and Contact headers even though the incoming message does not contain "privacy: user" header.

  • disabled (default)
  • enabled
 

Command Examples

The following example configures a Privacy Profile and attaches it to a trunk group:

set profiles services privacyProfile Test applyPrivacyId enabled applyPrivacyUser enabled passThruPrivacyInfo disabled supportPrivacyId enabled supportPrivacyUser enabled
set addressContext default zone defaultSigZone sipTrunkGroup TG1 services privacyProfile Test
commit
 
show profiles services privacyProfile
privacyProfile Test {
    applyPrivacyId      enabled;
    applyPrivacyUser    enabled;
    supportPrivacyId    enabled;
    supportPrivacyUser  enabled;
    passThruPrivacyInfo disabled;
}
[ok]

 

  • No labels