Field | Description |
---|
BASIC FIELDS: |
Gateway (Mandatory) | The gateway associated with the simulated call's policy request. Gateway choices include: - GSX: used to simulate a circuit switched call.
- SIP: used to simulate the second dip of a SIP (Session Initiation Protocol) call.
- H.323: used to simulate the second dip of an H.323 call.
The gateway you choose does not need to physically exist. However, it must be listed in the Gateway table on the PSX to which you are sending the simulated policy request. |
CalledNumber | The number being called. |
CallingNumber | The number from which the call originates. |
CarrierCode | The carrier code of the carrier from which the call is being routed. When ISUP signaling is used, the Carrier Code field is populated from the Carrier Information Parameter (CIP). |
SrcTrunkGroup (Mandatory) | The trunk group from which the call was received on the ingress trunk group. |
ADVANCED FIELDS: |
AdditionalCategoriesCount | The number of additional categories. |
AdditionalCategory | The additional category of the incoming call. |
BillingNumber | The billing number for the call. In ISUP terminology, this is referred to as the charge number. |
CalledUri | The called URI for the call. |
CallingBusinessGroup | Includes information such as business group ID and line privileges for the calling business group. |
CallingBusinessLocation | The calling business location. |
CalledDirectoryNumber | The called directory number for the call. |
CalledINNumber | The called intelligent network number for the call. |
CallingUri | The calling URI for the call. |
CallTrace | Use this field to enable or disable call tracing. If call tracing is enabled, you must provide the Global Call ID. Call tracing is enabled by default. |
CarrierSelection | The carrier code selection method for the call. The data for this field is derived from the carrier selection parameter in ISUP signaling. |
Category | Similar to OLIP (Originating Line Information Parameter). |
CauseOfNoId | The cause of no ID, which can be Invalid, Reserved, User Requested, Interactive with Other Service, or Coin Phone. |
ChosenCarrierInfo | The chosen carrier information for the call. |
ContractorNumber | This is a Japan-specific ISUP parameter which includes the telephone number for billing. |
Correlation ID | The correlation identifier. |
CountryCode | In the CAS (Channel Associated Signaling) protocol, the country code is transmitted as a separate field. When a country code is present and the signaling protocol is CAS, the country code is passed to the PSX in the Country Code field. |
DestTG | To simulate a SIP call received using global number format, specify the valid destination trunk groups that the PSX client would provide to the PSX in the policy request from the SIP DTG parameter. The PSX skips most call processing, fetches routes, and performs digit manipulation to convert SIP global numbers to numbers compatible with ISUP signaling, and then populates the route attributes in the policy response. |
Dialed Number | The (unchanged) number that was dialed. |
DPC Info | The customer-specific Destination Point Code details, including national ID, country ID, gateway ID, member status, and codes. |
DstTGAttributes | The direction and bearer capability of the destination trunk group. |
ForwardCallIndicators | The ISUP signaling forward call indicator data. The PSX client populates this information from the ISUP Forward Call Indicator parameter. |
GenericAddress | This field maps to SS7 IAM Generic Address parameter to store information such as original redirecting number and redirecting number. |
GenericDigits | Generic digits used for Switch ID/Trunkgroup ID-based routing. |
GenericName | The PSX client sends this generic name parameter in signaling message. |
GenericNumber | Feature Group D delivery. |
HLC | The Higher Layer Compatibility parameter value received in signaling for ISDN/ISUP interworking. |
JTIParameters | Customer-specific parameters. |
JurisdictionInfo | The jurisdiction information parameter. This parameter stores the NPA/ NXX assigned to the trunk or extracted from the calling party number. |
LIRoutingInfo | Used to specify Lawful Intercept Routing details. |
LLC | The Lower Layer Compatibility parameter value received in signaling for ISDN/ISUP interworking. |
LocationNumber | The geographic position of the calling party. The format is country-specific, but is likely to be some longitude/latitude numeric encoding. |
MessageType | The SIP message type for the call, which can be INVITE, NOTIFY, REGISTER, or SUBSCRIBE. |
MessageWaitingIndicatorState Request | The MWI state for a subscriber with MWI services (either MESSAGE_WAITING or NO_MESSAGE). |
MoreRoutesPolicyRequest | Check this box to request the return of more than 10 routes. |
NatureOfConnection | This is used to specify the following information for the call: - Continuity Check Indicator
- Echo Control Device Indicator
- Satellite Indicator
|
NetworkData | The Partition ID and Network ID that is expected in the ingress IAM. The PSX uses the received NetworkData to map in the database to the routing partition to which the carrier's customer belongs, used for routing international calls to and from the carrier's customer network. |
NFCI | This parameter, National Forward Call Indicator, contains zoning indicator, charge indicator, and IN call indicator fields. |
NonStandardParameter | Non Standard Parameter represents any user- or network-specific ISUP parameter that is not in the standard protocol definition. |
OriginalRedirectingNumber | The original called number. Signifies information sent in a forward direction when a call is redirected more than once and identifies the original called party. |
OriginatingCarrierInfo | This is a Japan-specific ISUP parameter. It includes the originating carrier code of the incoming call. |
Originating ChargeArea | The originating charge area for the call. |
OriginatingGatewayInfo | The SIP server or H.323 gateway from which the call originated. |
OriginatingLineInfo | The originating line type. This field is populated by the PSX client from the Originating Line Information Parameter in ISUP signaling. |
OriginatingTrunkGroup | The ingress trunk group on the gateway that is the actual originator of the call or the name of the originating trunk group on the SIP server. |
PolicyIndicators | Specifies whether to download script data in the policy response. With GSX script caching, the PSX does not automatically send script data in policy responses. |
PortabilityInfo | Specifies whether or not number portability information is included in the request (NP Status), and whether the Query on Release (QoR) is in the ingress message or the local exchange must perform the lookup (NPI Flags). This is for INAP use only. |
PresentationNumber | This field includes the presentation number for the call. |
PriorityCallInfo | Indicates whether the subscriber is a priority caller. |
PublicPresenceDirectoryNumber | Indicates the number type and number for a public presence directory number, if present. |
RedirectForwardInformation | This field includes the redirect forward information for the call. |
RedirectingBusinessGroup | Specifies a redirecting business group for the call. |
RedirectingNumber | Use to specify the number used instead of the called number to redirect the call. Signifies the information sent in the forward direction indicating the number from which the call was last redirected. |
RedirectionInfo | Provides the reason for redirecting the call. |
RedirectionCapability | This field includes the redirection capability parameter for the call. |
RedirectionNumber | Used to specify information sent in the backward direction indicating the number towards which the call must be rerouted or which has been forwarded. |
ScpCarrierCode | The SCP carrier code; same as the carrier code in the basic request. |
ScfID | Specifies the Service Control Function identifier. |
SipApplicationReceiveAddress | For SIP call routing, specifies the IP address and port number of the SIP interface on which the call was received. |
SipFromDisplayName | For SIP call routing, specified the From header display name. |
SipFromHeader | For SIP call routing, specifies the contents of the From header. |
SipPaiSipDisplayName | For SIP call routing, specifies the SIP P-Asserted-Identity SIP display name. |
SipPaiSipUri | For SIP call routing, specifies the SIP P-Asserted-Identity SIP URI. |
SipPaiTelDisplayName | For SIP call routing, specifies the SIP P-Asserted-Identity Tel display name. |
SIP P-ChargingVector | This field contains the SIP P-Charging-Vector parameter for the call. |
TimeStamp (Mandatory) | The time at which the simulated call was placed. |
TransitCarrierInfo | The transit carrier information to use for the call. |
TransitNetworkSelection | The transit network selection detail. |
TranslatedNumber | Number of translations on a per-route basis. |
UniversalCallData | Contains a universally unique call identifier (ID) comprised of the node ID (a number identifying the switch), a boot count (the number of reboots on the switch), and a Call ID. This parameter is encoded as a string containing a hexadecimal representation of the data and is used as the Session ID between the PSX and MAP Server. |
UserControlledOutgoingCallRestriction | Imposes different levels of outgoing call restrictions. Not used in this release. |
UserServiceInfo | Specifies the User Service Information parameter value received in signaling for ISDN/ISUP interworking. |
XCorellationID | A customer-specific parameter for a call involving the PSX SPAS service. |
VisitorMA | Specifies the Visitor MA (Message Area) parameter value, which is a customer-specific Japan ISUP extension parameter for routing calls in a mobile network. |
ZZCode | This is used in CAS signaling. |