Use the link detection allowArpBroadcastProbeReply parameter to control at the system-level whether the SBC allows or drops broadcast ARP replies.

Command Syntax

% set system admin <systemName> linkDetection allowArpBroadcastProbeReply <disabled | enabled>

Command Parameters

ParameterDescription

allowArpBroadcastProbeReply

Enable this flag to have the SBC allow broadcast replies to ARP probe requests on standby ports.

  • disabled (default)
  • enabled

Configuration Example

Issue the following commands to enable accepting broadcast replies to ARP probe requests on standby ports on a system named "SBC-1."

% set system admin SBC-1 linkDetection allowArpBroadcastProbeReply enabled
% commit

  • No labels