This object displays call CDR configuration.
Records are always written to the local disk.
On SBC main screen, go to Administration > Accounting and Logs > Admin. The Cdr Admin window is displayed.
Accounting and Logs - Edit Cdr Admin Window
The fields displayed are:
Edit Cdr Admin Window
Parameter | Description |
---|---|
| The type of calls for which accounting records should be logged on this SBC 5000 series:
|
| Specifies whether Intermediate Accounting is Enabled or Disabled for the Node. Options are:
|
| This configures the intermediate accounting interval in seconds. This object is only applicable when |
| Enable flag to allow second stage accounting records for two stage calls to inherit fields from the first stage call. Options are:
|
| Enable flag to populate the Called Number Before Translation field in the accounting record for a number for which an LNP lookup was performed and lookup indicated that number has not been ported. Options are:
|
| Specifies the method by which intermediate records are generated. Options are:
|
| Specifies Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records. The format is 00:00:00.0 where each field is: field octets contents range ----- ------- ------------ ----- 1 1 hour 0..23 2 2 minutes 0..59 3 3 seconds 0..60 (use 60 for leap-second) 4 4 deci-seconds 0..9 |
| Specifies whether Start Accounting is Enabled or Disabled for the Node. Options are:
|
Event Acct State | Enable flag to generate EVENT records for OOD SUBSCRIBE, REFER, NOTIFY, REGISTER, OPTIONS, MESSAGE and PUBLISH event records. CDRs are logged when OPTIONS is relayed to the egress side.
|
Event Acct PSX Info State | Log event records containing PSX information, such as PSX Congestion level, PSX Processing Time, Policy Response Call Type, PSX Billing Info, Route Label.
|
| Specifies whether a trap will be generated whenever an INTERMEDIATE record is generated. Options are:
|
| Specifies whether a destination SBC 5000 series propagates its billing data to originating GSX for GW-GW calls. Options are:
|
| Specifies whether or not to generate early ATTEMPT records. An early ATTEMPT record is associated with an early call disconnect, before the request is sent. Options are:
|
| Specifies the Accounting INTERMEDIATE Records Duration (in hours). Must be 1-24; default is 24. This parameter is only applicable when intermediate records mode is set to telcordia. The INTERMEDIATE record is generated for each call whose duration exceeds this threshold on long duration generation time. |
| Specifies whether or not to send the egress CDR information immediately after receiving and processing it. Options are:
|
| Specifies whether or not to use Ingress Far End Switch Type passed down from PSX IP TG for SIP ingress calls. Options are:
|
| Specifies the maximum length of the Record Sequence Number field in the CDR. Options are:
|