Use this object to control International Gateway behavior for the selected Signaling Profile.

To View and Edit International Gateway Support

On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Signaling Profile > International Gateway Support.

The Signaling - International Gateway Support can be checked for specific Signaling Profile. Choose the desired Signaling Profile from the drop-down box.

Call Routing - Profiles - Signaling Profile - Ingress Main Window

The International Gateway Support window is displayed.

Call Routing - Profiles - Signaling Profile - International Gateway Support Edit Window

The following fields are displayed:

Call Routing - Profiles - Signaling Profile - International Gateway Support Parameters


Parameter


Description

 Dont Convert Called Number

 For international calls, if the destination country and the country code of the egress trunk group are the same, the called number is converted into the national number, and the country code is stripped from the digits.

  • disable (default)
  • enable
 Dont Convert Calling Number

 For international calls, if the destination country and the country code of the egress trunk group are the same, the calling number is converted into an international number by adding the country code of the ingress trunk group.

  • disable (default)
  • enable

Make the required changes to the required fields and click Save to save the changes.

 

  • No labels