Use this object to configure Policy data for this SIP Trunk Group.

To View and Edit Policy

On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Policy. The Policy window is displayed.

The Policy can be checked for each Address Context, for each Zone, for each SIP Trunk Group created or for all the Address Contexts, Zones and SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and SIP Trunk Group.

The Edit Policy window is displayed.

SIP Trunk Group - Policy Edit Window

The following fields are displayed:

SIP Trunk Group - Policy

Parameter

Description

Carrier

 Specifies the serving carrier code.

Country

 Specifies the serving country code.

SIP Domain

 Specifies the domain string used when SIP signaling requires a configured domain name.

Localization Variant

Specifies the parameters and controls used for localization variant for this trunk group.

  • Generic
  • Japan
  • North America (default)  

TG IP Version Preference

Use this flag to choose the IP address preference on the ingress Trunk Group. 

  • Both-IPv4-and-IPv6 (default)
  • IPv4-only
  • IPv6-only
Preferred identity

When AoR Group profiles are configured, use this flag to specify whether to enable using the preferred identity configured in the profile to populate the originating identity (P-Asserted-Identity, From, Remote-Party-Identity headers in the egress INVITE) for calls initiated by any of the AoRs in the group. 

  • Disable (default)
  • Enable

Refer to Profiles - Aor Group Profile for more information.

Feature Control Profile

 Specifies the name of the Feature Control Profile used for this policy.

IP Signaling Peer Group

 Specifies the name of the IP Signaling Peer Group used.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

Additional topics:

  • No labels