In this section:
The following matrix lists the maximum number of sessions between two codec types for an SBC 5400 equipped with one DSP25 module. The SBC 5400 can be configured with up to four DSP25 modules.
If more than one module is installed, multiply the values in the table below by a factor of two, three or four, as appropriate, to obtain approximate DSP density values. DSP density values are approximate and intended for use as a general guide when estimating transcoding capabilities.
Values associated with the same codec (i.e. like-codec to like-codec) refer to re-packetization.
The following matrix lists the maximum number of sessions between two codec types for an SBC 5400 equipped with one DSP20 module.