In this section:

Related articles:

 

Configuration of SBC SWe Cloud clusters on OpenStack is managed using the EMS and the SBC Configuration Manager.

Before configuring D-SBC (S-SBC and M-SBC) deployments, you must configure the DNS server for the M-SBC with the MGT/PKT0/PKT1 IP addresses for the Load Balancing Service (LBS). For D-SBC Sig Port service, configure the DNS server for the M-SBC fixed IP address of the packet interface PKT0/PKT1 (if floating IP is not configured on the interface). The IP addresses depend on the deployed network.

Basic configuration of I-SBC deployments includes a combination of most of the procedures required for the individual distributed SBC components so that both signaling and media configuration is completed.

 

Note

Once SBC instances are configured, you must configure PSX for making a basic call. For more information on configuring PSX, refer to PSX Provisioning documentation.

Note

Geographical Redundancy High Availability (GRHA) is not supported on SBC SWe Cloud.