In this section:
Current Alarms displays details about the Alarms that are currently present in the triggered condition in the SBC. For further details on Alarms, refer to Dashboard - Alarms.
In the EMA, navigate to Monitoring > Dashboard > Alarms > Current Alarms.
The window Current Alarms appear, along with a frame containing the table Current Alarm List.
The parameters (displayed as columns) in the table Current Alarm List are:
To edit a Current Alarm, select it from the list displayed.
The frame Edit Alarm appears below the table(frame) Current Alarm List.
By default, the status of the alarm selected for editing is Active. To change the status to Acknowledged or Cleared, select the corresponding option against the field Status.
Make necessary changes for the fields Status and Comments. Click Save to save the changes made. Click Undo Edits to cancel all modifications since the last saved state.
The buttons Save and Undo Edits becomes active only after any changes are made in the Edit Alarm frame.
To enable live feed of the alarms and different events triggering them, click the button Enable Live Feed in the table(frame) Current Alarm List. The live feed is displayed and the button changes to Disable Live Feed. To disable the live feed, click Disable Live Feed.
To clear all the alarms shown in the table Current Alarm List, click the button Clear All Alarms Shown in the table(frame) Current Alarm List. A pop-up Clear Alarms Shown in Current Page appears, asking for the confirmation to proceed further. Click Yes to confirm. Click No to cancel clearing the alarms displayed in the current page.
To clear all the current alarms in the entire SBC, click the button Clear All Alarms in System in the table(frame) Current Alarm List. A pop-up Clear All Alarms appears, asking for the confirmation to proceed further. Click Yes to confirm. Click No to cancel clearing the alarms.