In this section:
The two test beds used to collect benchmarking data are depicted below. Benchmarking SetupBenchmarking Setup
Note
- Unless explicitly mentioned, the performance figures shown below is collected without raising any alarms or errors.
- The limiting factors are packet loss and re-transmissions, unless anything is specified (excluding transcode).
- The core wise usage is not mentioned, as in most cases the default profile is used.
- Packet loss data contains maximum percentage of packet loss for end point.
Performance
| Serial Number | Instance Type HA | Instance Type HFE | Scenario | Profile | CPS/CHT | Sessions | BW(Mbits/sec) | Max Memory Used | CPU/CORE UTILISATION (AVG/MAX) | Packet loss |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | n1-standard-4 | n1-standard-4 | 711-711(ulaw) | DEFAULT | 20/100 | 2000 | 181 | 25.7 % | 32/71 | UAC-0 UAS-0 SBC-0 |
| 2 | n1-standard-4 | n1-standard-4 | 729-729 | DEFAULT | 20/100 | 2000 | 77 | 25.72 % | 31/54 | UAC-0 UAS-0 SBC-0 |
| 3 | n1-standard-4 | n1-standard-4 | MULAW-SRTP(Single leg) | DEFAULT | 20/100 | 2000 | 256 | 26.57 % | 40/49 | UAC-0.02 UAS-0.04 SBC-0.04(ing)/0(egr) |
| 4 | n1-standard-4 | n1-standard-4 | 711-729 transcode | DEFAULT | 1.5/100 | 150 | 13(ing)/5.8(egr) | 24.182 % | 27/45 | UAC-0 UAS-0 SBC-0 |
| 5 | n1-standard-8 | n1-standard-8 | MULAW(711-711) | DEFAULT | 30/100 | 3000 | 272 | 30.2 % | 48/52 | UAC1 - 0.02 UAC2 -0.02 UAS - 0.02 SBC - 0 |
| 6 | n1-standard-8 | n1-standard-8 | TLS SRTP (711-711) | DEFAULT | 15/100 | 1500 | 192 | 28.94 % | 45/52 | UAC:0 UAS:0 SBC:0 |
| 7 | n1-standard-8 | n1-standard-8 | 711-729 transcode | STANDARD TRANSCODE | 5/100 | 500 | 45.3 /19.25 | 27.51 % | 45/52 | UAC:0 UAS:0 SBC:0 |
| 8 | n1-standard-8 | n1-standard-8 | 729 passthru | DEFAULT | 25/100 | 2500 | 96.25 | 30.04 % | 40/47 | UAC1 - 0 UAC2 -0.04 /UAS - 0.02 SBC - 0.02 |
Overview
Content Tools