This object is used to configure sender report interval.

On SBC main screen, go to All > System > Media > Media Rtcp Control. The Media Rtcp Control window is displayed.

System - Media - Media Rtcp Control


 

The following fields are displayed:

Media RTCP Control

Parameter Description
Sender Report IntervalSpecifies the RTCP SR (sender report) interval when RTCP is terminated by NP.
Send BYEPacket

Use this flag to choose whether or not to send RTCP BYE packet.

  • disabled – Use this setting to suppress RTCP BYE packet in a pass-through scenario when RTCP terminationForPassthrough option is enabled and the call is not established. This setting is useful to avoid one-way audio when Dynamic LRBT and RTCP are in use at the same time.
  • enabled (default) – When this flag is enabled, the SBC sends the RTCP BYE packet when a call is terminated. This command affects all calls configured with RTCP termination.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

  • No labels