Availability: Since 6.2.3R0
Use the Link Detection window to control at the system-level whether the SBC allows or drops broadcast ARP replies.
Note
For SBC SWe deployments, this parameter is not applicable and the SBC allows any type of broadcast ARP packet, regardless of the setting. Be aware that if your network carries a high volume of opCode Request packets, the SBC can be susceptible to a false indication of link failure. This type of packet is typically sent during broadcast ARP storms.
Note
For SBC 7000 series systems, enabling this parameter results in the SBC allowing through opCode Reply packets and dropping opCode Request packets.
From the SBC main window, go to All > System > Admin > Link Detection
The Link Detection window opens.
Link Detection Window
Use the following table to set the link detection option and then click Save.
Link Detection Parameter
| Parameter | Description |
|---|---|
| Allow ARP Broadcast Probe Reply | Specifies whether the SBC allows or drops broadcast replies to ARP probe requests on standby ports. The options are:
|
Overview
Content Tools