In this section:
This profile provides information about each SIP-to-CPC Cause Mapping Profile on the node.
The SBC Core supports up to 64 SIP-to-CPC and 64 CPC-to-SIP cause code mapping profiles.
% set profiles signaling sipCauseCodeMapping sipToCpcCauseMapProfile <sipToCpcCauseMapProfile> loc3xx <locNxx> loc4xx <locNxx> loc5xx <locNxx> loc6xx <locNxx> locBye <locBye> locCancel <locCancel> cancelCause <cancelCause> baseProfile <baseProfile> causeMap <causeMap> cpcCause <cpcCause> % show profiles signaling sipCauseCodeMapping sipToCpcCauseMapProfile <sipToCpcCauseMapProfile> displaylevel <displaylevel> % delete profiles signaling sipCauseCodeMapping <sipToCpcCauseMapProfile>
The SIP to CPC Cause Code Mapping Profile Parameters are as shown below:
SP to CPC code mapping profile parameters
Parameter | Length/Range | Description |
---|---|---|
| 1-23 | The name of a SIP-to-CPC Cause Map Profile. This table contains information about each SIP-to-CPC Cause Mapping Profile on the node. The default values are:
|
| 1-23 | The name of the default SIP-to-CPC Mapping Profile on which to base this new profile.
NOTE: The base profiles cannot be modified. The base profile that you designate will be copied to the profile that you create. Additions, modifications, and deletions may subsequently be applied to the new profile through the set command. |
| N/A | The Q850 cause value that the SIP CANCEL message should generate. RFC3398 specifies 16 (normal clearing), whereas Q1912.5 specifies 31 (normal unspecified). The respective default profiles contain these mappings but this provides a user override to the default mapping. Must be 1-127. |
| N/A | Specifies the SIP-to-CPC cause mapping values. The possible values are:
|
| N/A | CPC Cause value for a given SIP cause value. Must be 1-127. Default value is 127. |
| N/A | Specifies the location value to use for the SS7 REL message when a SIP 3XX, 4XX, 5XX, or 6XX message is received:
|
| N/A | Specifies the location value to use for the SS7 REL message when a SIP BYE message is received:
|
| N/A | Specifies the location value to use for the SS7 REL message when a SIP CANCEL message is received:
|
Following is an example of creating new CPC-to-SIP and SIP-to-CPC profiles, and then associating the profiles to a trunk group.
% set profiles signaling sipCauseCodeMapping cpcToSipCauseMapProfile INGRESS_CPC_TO_SIP baseProfile defaultTs29163CpcSip % set profiles signaling sipCauseCodeMapping sipToCpcCauseMapProfile INGRESS_SIP_TO_CPC baseProfile defaultRfc3398SipCpc % set addressContext default zone ZONE1 sipTrunkGroup TG_SIPART signaling causeCodeMapping cpcSipCauseMappingProfile INGRESS_CPC_TO_SIP % set addressContext default zone ZONE1 sipTrunkGroup TG_SIPART signaling causeCodeMapping sipCpcCauseMappingProfile INGRESS_SIP_TO_CPC