Use this parameter to control how the PEM header is sent during Preconditions interworking.  

Modified: for 6.2.2

Command Syntax

% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <sipTrunkGroup name> signaling pemInterworking <sendPEMAfterIngressPreconditions | sendPEMBeforeIngressPreconditions>

Command Parameters

pemInterworking Parameters

ParameterDescription
pemInterworking

Use this parameter to control how the PEM header is sent during Preconditions interworking.

  • sendPEMBeforeIngressPreconditions (default) – When configured, the PEM header is sent in 183 and 200 OK Update used for Ingress Preconditions Interworking.
  • sendPEMAfterIngressPreconditions – When configured, the PEM Header is not sent in 183 and 200 OK Update used for Ingress Preconditions Interworking. PEM header will be inserted in the next 18x and 200 OK Update after Ingress Preconditions.