In this section:
% set profiles digitParameterHandling numberTranslationCriteria <trigger_criteria_id> calledUri callingNumber carrier none toHeader trunkGroup Each of the above parameters (except 'none') use following options: <element_id_1> <element_id_1> <national_code> <country_code> lookupType <e911 | enumCnam | enumLnp | enumSipAor>
The Number Translation parameters are as shown below:
Parameter | Description |
---|---|
| The number translation criteria (route) label. Use this object to configure Number Translation Criteria for one of element types defined below. Each element type includes the following addtional parameters to configure.
|
calledUri | This call processing element specifies the destination of the call. And this parameter is with respect to Request-URI in the received INVITE from UE. When configuring number translation for a Carrier, set the following parameters (see above for field descriptions):
|
| This call processing element specifies the source of the call. When configuring number translation for a Carrier, set the following parameters (see above for field descriptions):
|
| When configuring number translation for a Carrier, set the following parameters (see above for field descriptions):
|
| When configuring number translation with no element type, set the following parameters (see above for field descriptions):
|
toHeader | This call processing element specifies the destination of the call with respect to To Header in the received INVITE from UE. When configuring number translation for a Carrier, set the following parameters (see above for field descriptions):
|
| When configuring number translation for a trunk group, set the following parameters (see above for field descriptions):
|