In this section:

 

Use this feature to configure the target whose media is captured and sent to the monitoring server.

Access to the Media Capture Tool is restricted to privileged, password-protected user accounts. Tracking of its use is tracked by AUD logging.

Command Syntax

% set global monitorTarget <target_name>
   duration <1-65535>
   gcid <0-2147483647>
   monitorEndpoint <endpoint name>
   monitorLeg <all | both | egress | ingress>
   state <disabled | enabled>

Command Parameters

Global Monitor Target Parameters

Parameter

Length/Range

Description

<target name>1-23 charactersThe target name.
duration1-65535<value> (Default = 0) – The duration (in seconds) that the monitor target is tapped.
gcid0-2147483647<value> – The target GCID (Global Call Identifier) to tap.
monitorEndpoint1-23 characters<endpoint name> – Name of endpoint to use for recording.
monitorLegN/A

Specifies which leg to tap:

  • all – All four legs in GW-GW network
  • both (default) – Both ingress and ingress leg
  • egress Egress leg only
  • ingress – Ingress leg only

state

N/A

Administrative state of the monitor target:

  • disabled (default)
  • enabled

 

Command Example

% set global monitorTarget mciTarget duration 1000 gcid 100 monitorEndpoint MyEndpoint monitorLeg both state enabled

  

  • No labels