In this section:

Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a H323 trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified H323 trunk group.

To View Ingress IP Prefixes

On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323 Trunk Group > Ingress IP Prefix. The Ingress IP Prefix window is displayed.

Use the drop-down lists to select the desired Address Context, Zone and H323 Trunk Group.

System Provisioning - Ingress IP Prefix

To Create an Ingress IP Prefix

To create a new Ingress IP Prefix, click New Ingress IP Prefix on the Ingress IP Prefix List panel.

System Provisioning - Ingress IP Prefix Fields

The Create New Ingress IP Prefix window is displayed.

System Provisioning - Ingress IP Prefix Create Window

Use the following table to specify its attributes and click Save. An Ingress IP Prefix cannot be edited after it is created.

System Provision - Ingress IP Prefix Parameters

Parameter

Description

IP Address V4 or V6

Specifies the IPv4 or IPv6 addresses of ingress peers. Enter the address in the following format:

  • IPv4 – Specifies the IPv4 address in dotted decimal form (for example 10.11.12.0 24).
  • IPv6 – The IPv6 address in hexadecimal/colon form (for example, fd00:21:445:128::7880 64).
Prefix LengthSpecifies the number of bits which form the network part of the IP address. The rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 32.

Modified: for 6.2.2

To Copy an Ingress IP Prefix

To copy an Ingress IP Prefix and make any minor changes, click the radio button next to the specific Ingress IP Prefix to highlight the row.

System Provisioning - Ingress IP Prefix Highlighted

Click Copy Ingress IP Prefix on the Ingress IP Prefix List panel.

System Provisioning - Ingress Ip Prefix Fields

The Copy Selected Ingress IP Prefix window is displayed along with the field details which can be edited.

System Provisioning - Ingress IP Prefix Copy Window

Make any changes and click Save. The copied Ingress IP Prefix is displayed at the bottom of the original Ingress IP Prefix in the Ingress IP Prefix List panel.

To Delete Ingress IP Prefix

To delete an Ingress IP Prefix, click the radio button next to the specific Ingress IP Prefix which you want to delete.

System Provisioning - Ingress IP Prefix Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

System Provisioning - Ingress IP Prefix Delete Confirmation

Click Yes to remove the specific Ingress IP Prefix from the list.